，-
E-mail
holry@holrymotor.com
- Phone
-
Address
No. 295, Fumin Road, Lucheng Town, Qishuyan District, Changzhou City, Jiangsu Province
Product Categories
- Motor Drivers
- stepper motor drivers
- Planetary Reducer
- NEMA45（115MM）
- NEMA35(90MM)
- NEMA24(60MM)
- Servo motors
- NEMA51-130×130MM
- NEMA42-110×110MM
- NEMA31-80×80MM
- NEMA24-60×60MM
- NEMA16-40×40MM
- Brushless Motors
- NEMA17-42×42MM
- NEMA34-86×86MM
- NEMA23-57×57MM
- NEMA45-110×110MM
- Linear Actuators
- External Lead Screw Linear Actuators
- Ball screw linear actuators
- Non-Captive Lead Screw Linear Actuator
- Electric Cylinder/captive Lead Screw Linear Actuator
- Spindle motors
- ATC Spindle Motor
- VFD CNC Spindle Motor
- Stepper Motors
- Special stepper motors
- closed loop motors
- Hybrid stepper motors
- Gearbox stepper motors
- PM stepper motors
Changzhou Holry Electric Technology Co., Ltd.Free·1YRS
Nema 34 86mm Gearbox Stepper Motor
NegotiableUpdate on November 04
- Model
- Nature of the Manufacturer
- Other
- Product Category
- Gearbox stepper motors
- Place of Origin
- City, Province
Overview
General technical characteristics:1. The stepping motor is used in low-speed occasions---the speed does not exceed 1000 revolutions per minute, (6666PPS at 0.9 degrees), preferably between 1000-3000PPS (0.9 degrees), and it can be used here by a decelerating device. At this time, the motor has high working efficiency and low noise;2. The stepping motor is best not to use the full-step state, the vibration is large in the full-step state;3. The voltage value in the motor specification is not the driving voltage volt......
Product Details
stepper motor nema 34 description
A Nema 34 stepper motor is a stepper motor with a 3.4 x 3.4 inch (86 x 86 mm) faceplate. Nema 34 high torque stepper motors deliver great value with no quality sacrifice. These motors are engineered to provide the highest possible torque but minimize vibration and audible noise. A wide range of motor windings and stack lengths are readily available, or the motors can be customized to meet your machine requirements.
stepper motor nema 34 Technique Specification
Model | Step (°) | Motor Length L2(mm) | Rate Voltage (V) | Rate Current (A) | Phase Resistance (Q) | Phase Inductance (mH) | Holding Torque (N.M) | Lead Wire (NO.) | Motor Weight (kg) |
86HB80F205AJ | 1.8 | 80 | 2.5 | 5.5 | 0.45 | 3 | 4.5 | 4 | 5 |
86HB98F5AJ | 1.8 | 98 | 2.5 | 5 | 0.5 | 3.5 | 5.0 | 4 | 5.5 |
86HB113F4AJ | 1.8 | 113 | 3.0 | 4.0 | 0.6 | 5.0 | 6.5 | 4 | 6.2 |
86HB156F5AJ | 1.8 | 156 | 4.4 | 5.5 | 0.8 | 7.5 | 10 | 4 | 7.5 |
Available reducer data
Reduction ratio | 4,5, 10 | 16, 20, 25, 40, 45, 50, 100 | |
Length LI | mm | 73 | 87 |
Rated torque | Nm | 50 | 80 |
Maximum load | Nm | 100 | 160 |
Efficiency | % | 96 | 94 |
Backlash | arcmin | <15 | <25 |
Stepper motor appearance dimension drawing and motor shaft out method
Drawing download:
86-NEMA34.PDF
stepper motor General technical characteristics:
1. The stepping motor is used in low-speed occasions---the speed does not exceed 1000 revolutions per minute, (6666PPS at 0.9 degrees), preferably between 1000-3000PPS (0.9 degrees), and it can be used here by a decelerating device. At this time, the motor has high working efficiency and low noise;
2. The stepping motor is best not to use the full-step state, the vibration is large in the full-step state;
3. The voltage value in the motor specification is not the driving voltage volt value. The specific driving voltage can be selected according to the stepper driver (recommendations: 42 and below motors use 12-24V, 57 motors use DC 24V-48V, 86 use DC 48-80V, 110 motor adopts higher than DC 80V)
4. For loads with large moments of inertia, a large frame size motor should be selected;
stepper motor video
Buy high quality and cost-effective 86MM Gearbox stepper motor nema 34 to HOLRY Motor, we are stepper motor nema 34 manufacturer & supplier & factory.
Quick Details
Warranty: 1year | Place of Origin: Jiangsu, China |
| Brａnd Name: HOLRY | Model Number: 57HB51F3 |
| Type: Hybrid | Motor Length: 51mm |
| Rated Voltage: 3V | Rated Current: 3A |
| Phase Resistance: 1.1Ω | Phase Inductance: 2.8mH |
| Phase Inductance: 2.8mH | Holding Torque: 0.65N.M |
| Lead Wire: 4NO. | Rotor Inertia: 120g.cm² |
| Motor Weight: 0.45Kg | Insulation Class: B |
Stepper Motor Supply Ability
-
10000 Piece/Pieces per Month
Stepper Motor Packaging & Delivery
Port
Shanghai
Packaging Details
Carton with foam inside or as per customer's requirements
Stepper Motor - HOLRY
Packaging & Delivery
Stepper Motor - HOLRY
Packaging & Delivery
FAQ
FAQ
1. Do you have online contact info?
A1: Yes, whatsapp is +86
2. How can we know the product quality?
A2: We suggest you to order a sample. Also, you can send us for detail photos for checking if you cannot get enough information in the product page.
3. Is this your final price? May i have the discount?
A3: Our price is the factory price, and if your quantity is larger, we will allow the discount for you.
4.Is there cheap shipping cost to import to our country?
A4: Yes, we have our regular shipping company, they have very good price.
5. Can we visit your factory?
A5: Yes welcome warmly. No. 295, Fumin Road, Lucheng Town, Qishuyan, Changzhou City, Jiangsu Province, China.
6.What is the Warranty for your products?
A6: All products product warranty for one year, free service for 10 years.
Similar Product Recommend
