MIC500S Series gas detector can be used in 24 hours continuous online monitoring of concentrations of multiple types of gases in the field. The types for detection are more than 500 types.With a 4-20 mA analog output, can be simply integrated into a Distributed Control System (DCS) to provide warnings.Simple to install service and calibrate, MIC500S requires no hot work permit and the PID sensor is accessible and changeable in a matter of seconds.
Details
1. Multiple alarm modes, and multi-directional and three-dimensional indication alarm states.
Alarm types include concentration alarm and failure alarm.
Multiple alarm mode settings: low alarm, high alarm, interval alarm, and weighted average alarm.
2. Zero-point automatic tracking; long-term use will not be affected by the zero drift.
3. Multi-level calibration for target points, can ensure the linearity and accuracy of the measurements.
4. Log recording Record the calibration logs, repair logs, failure history, failure countermeasure solutions,
sensor service life due to reminder, and function of reminder for the time of next concentration calibration.
5. Data recovery function; in case of misoperation, it is possible to select partial or full recovery.
6. Mis-operation recognition function: automatic recognition and prevention of the concentration calibration misoperation,
which is possible to avoid the poor performance that may be caused by human factors.
Parameter
Gases to be detected | Ozone/O3 Gas Detector |
Detection range | 0--1000 ppm 0-- 5000 ppm 0-- 50000ppm 0-- 200mg/L Other ranges can be customized |
Resolution | 0.01ppm or 0.001ppm (0 ~ 10 ppm); 0.01ppm (0 ~ 100 ppm), 0.1ppm (0 ~ 1000 ppm), 1ppm (0 ~ 10000 ppm or more), 0.01 mg/l (0 ~ 200 mg/l), 0.1% LEL, 0.01%Vol 0.001% Vol Other ranges can be customized |
Detection principle | Ultraviolet sensor Electrochemical, infrared, thermal conductivity, PID photoionization, and so on. Depending on the type of gas, range, field environment, and user demand, Sensor can be customized |
Sensor service life | Electrochemical principle: 2 ~ 3 years; Infrared principle: 5 ~ 10 years; Thermal conductivity: 5 years |
Allowable error | ≤±3% F.S (other or higher precision levels can be customized) |
Linearity | ≤±2% | Repeatability | ≤±2% | Uncertainty | ≤±2% |
Response time | T90≤20 seconds | Recovery time | ≤30 seconds |
Working environment | Temperature: -40 ℃ ~ + 70 ℃, humidity: ≤10 ~ 95% RH (regular) |
Display method | 1.7-inch high-definition color screen |
Working voltage | 12 ~ 30VDC direct current the standard power supply for a single piece of equipment is 24V, DC stabilized voltage switching power supply of 1A or greater than 1A |
Protection level | IP65 |
Explosion-proof type | Explosion suppression type |
Explosion-proof mark | ExdⅡCT6, certificate number: CNEx15.1283 |
Application
All the cases require the fixed installation, and online detection of gas concentrations such as petroleum, chemical, pharmaceutical, environmental protection, combustion gas distribution, warehousing, smoke gas analysis, air governance, and so on.