-
E-mail
info@bjzetron.com
- Phone
- Address
Membership
Help
Beijing Zetron Technology Co., LtdFree·1YRS
info@bjzetron.com
PTM500 Auto Exhaust Gas Analyzer
PTM500 auto exhaust analyzer adopts the principle of non-spectrophotometric infrared absorption method. The concentration of HC, CO, CO, O 2, NO in auto exhaust gas is measured by computer analysis. It can also be equipped with auto comprehensive performance testing line specially used in auto repair industry.
It meets the national GB/T 18285-2005 standard.
3 types of cars,5 types of gas ① The exhaust gas can be detected for vehicles fueled by Petroleum Gas(LPG),Compressed Natural Gas(CNG), and gasoline and other alternative fuel vehicles.② It adopted imported sensor, more accurate measurement.
③The concentration of HC, CO, CO, CO, O 2, NO in auto exhaust gas was measured by means of computer analysis based on the principle of non-spectral infrared absorption method.
④ Optional function: rotate speed and oil temperature Measurement
Multi test mode,convenient to use
① Two kinds of Test Function: General and Two-speed idle
② Automatically calculates and displays the value of excess air coefficient. At the same time show the air-fuel ratio.
③ The auto power supply inverter can be configured to facilitate exhaust gas inspection on board.
Powerful standard configuration
① 7 inch high brightness LCD display
② Support multi-language (English & Chinese)operation menu
③ Equipped with internal printer
④ Automatically Auto-zeroing
⑤ Have more than 500 groups of data storage and access functions
⑥ Equipped with functions of plate number and time display
⑦ Equipped with RS-232C digital serial communication interface to facilitate networking
Tag: Detection Concentration of Carbon monoxide in vehicle exhaust, Detection Concentration of Hydrocarbons in vehicle exhaust, Detection Concentration of Oxygen in vehicle exhaust, Detection Concentration of Nitrogen monoxide in vehicle exhaust, PTM500 Auto Exhaust Analyzer concentration of HC, CO, CO, O 2, NO in auto exhaust gas is measured by computer analysis. OEM/ODM gas detector
Mode | PTM500 |
Warm up time | 10 minutes |
Size | 420 * 320 * 250 (mm) |
Weight | 9.8 Kg |
Power supply | AC220V ±10%; 50Hz ±1Hz |
Environment conditions | Temperature: -5~40℃ |
Humidity: ≤95% | |
Pressure: 70~106 kps | |
Measurement range | HC: 0~10000 10-6(ppm) vol |
CO: 0~10.0 10-2 (%)vol | |
CO2: 0~20.0 10-2(%)vol | |
O2:0~25.0 10-2 (%) vol | |
NOx:0~5000 10-6(ppm)vol | |
Indication Error | CO: ±5% |
CO2: ±5% | |
O2: ±5% | |
NOx: ±4% | |
HC:±5% | |
Response Time | CO, HC, CO2≤10S |
NOx, O2≤15S | |
Display | 7 inch high brightness LCD display |
It's suitable for all levels of traffic, public security testing stations, environmental protection exhaust control points at all levels, teaching laboratories of colleges and universities, auto manufacturers, engine manufacturers, motorcycle manufacturing areas, as well as the use of one, two and three types of auto repair plants, 4S shops, auto repair and maintenance departments.