Portable styrene gas analyzer PTM600-C8H8

Features of PTM600 portable styrene gas analyzer:

● Waterproof, dustproof, explosion-proof, shockproof, intrinsically safe circuit design, anti-static, anti-electromagnetic interference, passed the national standard test and CMC measurement instrument production license certification

●Protection level IP66, built-in water vapor and dust filter to prevent damage to sensors and instruments due to water vapor and dust

●Built-in pump suction measurement, integrated water vapor and dust filter, optional professional accessories for high temperature, high humidity, high dust environment, rapid response; special road design, the sampling distance is greater than 10 meters.

●3.5-inch high-definition color screen displays real-time concentration, alarm, time, temperature, humidity, storage, communication, printing, power, charging status and other information. The menu interface uses high-definition simulation icons to display the function names of each menu

●Large-capacity data storage function, standard 100,000 data storage capacity, larger capacity can be customized. Optional U disk storage or SD card storage function, supports real-time storage, timing storage or only alarm concentration data and time, supports local viewing and deleting data, and can also upload data to the computer via USB, infrared communication, and RS232 interface , Use the host computer software to analyze the data, store, and print.

●Bluetooth communication interface, USB interface, RS232 interface automatic identification, optional built-in printer or external wireless Bluetooth printer Print content: company name, gas name, date and time, ambient temperature and humidity, concentration data, test results (qualified)

●USB charging port, can be charged by computer or power bank, compatible with phone charger, overcharge, overdischarge, overvoltage, short circuit, overheating protection, 5-level accurate power display, support USB hot swap, the detector can be normal when charging Work

●Using 10800mAH high-capacity rechargeable polymer battery, which can work continuously for a long time

●Sound and light alarm, visual alarm, under-voltage alarm, fault alarm, multi-directional three-dimensional display of alarm status when alarming.

●Alarm value can be set, the alarm mode can be low alarm, high alarm, interval alarm, weighted average alarm

●High-precision temperature and humidity measurement (optional), while temperature compensation is performed on the sensor. The temperature range of the instrument is -40 to 70 degrees, and it can detect gas at 1300 degrees (optional high temperature sampling cooling filter handle or high temperature and high humidity pretreatment system)

●It can detect as low as 0.001PPM and as high as 99.999%Vol, and supports automatic switching between high and low ranges (please specify when ordering).

●Real-time detection or timing detection is possible (for the case where the amount of the gas to be measured is relatively small), the pump can be turned off when it is not detected to extend the startup time.

●It can detect 1 to 6 kinds of gases at the same time, and it can be expanded to 24 kinds of gases at the same time. The units can be switched freely. Normal gases do not need to enter the molecular weight, and the molecular weight of special gases needs to be automatically calculated and switched. Units are optional: PPM, mg/m3, Vol%, LEL%, PPHM, ppb, mg/L

●Three display modes can be switched: display the concentration of four gases at the same time, the concentration of a single channel gas and the real-time curve can be displayed in a large font cycle, and the automatic cycle or manual cycle between the channels can be switched. Gas name, you can view the history curve graph.

●Chinese and English interface can be selected, the default Chinese interface, concise Chinese or English operation prompts, users of all ages can easily operate

●Data recovery function, selective recovery or full recovery, automatic identification and prevention of misoperation of concentration calibration, to avoid defects caused by human factors

●Zero point automatic tracking, multi-level calibration of target points, to ensure the linearity and accuracy of measurement, and can meet the national standards and the standards of local metrology bureaus at the same time.

●Can record calibration log, maintenance log, troubleshooting countermeasures, reminder of the expiration of sensor life, reminder of the next concentration calibration time

PTM600手提式苯乙烯气体分析仪技术参数：

检测气体：苯乙烯C8H8 ，选配：同时检测1～6种，最多18种气体和温湿度测量，视传感器和现场环境而定

检测范围：0-10、50、100、200、1000ppm

传感器说明：常规

分 辨 率：0.01ppm或0.001ppm(0～10 ppm);0.01ppm(0～100 ppm)，0.1ppm(0～1000 ppm)，1ppm(0～1000 ppm以上)，0.1%LEL(0～99%LEL)、0.01%Vol或0.001%Vol(0～99.999%Vol)

检测原理：电化学、红外、热导、PID光离子、催化燃烧，根据气体类型、量程、现场环境和用户需求而定

传感器寿命：电化学原理3年，氧气2年或6年，红外5～10年，催化燃烧3年、热导5年，PID2年

检测方式：内置泵吸式，流量800毫升/分钟

显示方式：3.5寸320X240分辨率的大屏幕高清彩屏显示

检测精度：≤±2%(F.S)(更高精度可定制)

线 性 度：≤±2%

重 复 性：≤±2%

不确定度：≤±2%

报警方式：声光报警、视觉报警、声光+视觉报警、关闭报警

响应时间：T90≤20秒

恢复时间：≤30秒

工作电源：DC3.7V

使用环境：温度-40℃~+70℃;相对湿度≤0-99%RH

样气温度：-40℃~+70℃ ，选配高温采样降温过滤手柄或高温高湿度预处理系统可检测1300℃的烟气浓度

温度显示：-40℃~+70℃(选配) 精度0.5℃

湿度显示：0-99%RH (选配)精度3%RH

电池容量：3.7VDC，10800mAH可充电的高分子聚合物电池 ,带过充、过放、过压、短路保护功能

数据存储：标准容量10万条数据，选配SD卡、U盘存储，容量不限，支持本机查看、删除或数据导出，免费上位机通讯软件，存储功能默认为关闭状态，可设置为开启状态，存储时间间隔任意设置

通讯接口：蓝牙、USB、RS232 自动识别

打 印 机：选配，内置微型打印机或外置微型无线蓝牙打印机

无线传输：选配，可以把数据无线传输到手机、远程监控中心、监控电脑等监控设备，利用上位机在电脑上进行数据分析、存储、打印等功能

防爆类型：本质安全型

防爆标志：Exia II CT4

防护等级：IP66，防雨淋与水溅、防尘

外型尺寸：255×210×125mm(L×H×W)

重 量：2.5Kg

标准附件：说明书、合格证、保修卡、USB充电器(含数据线)、高档铝合金仪器箱、光盘(上位机通讯软件) 、40cm不锈钢采样手柄(1米软管)

选配附件：内置微型打印机、外置微型无线红外打印机、温湿度测量功能、U盘存储、无线数据通讯功能、高温采样降温过滤手柄、高温高湿预处理系统、外置远距离采样泵、湿度粉尘过滤器多个、0.9m 可伸缩采样手柄(1米软管)

应用场合：石油、化工、医药、环保、烟气分析、空气治理等所有需要检测分析气体浓度的场合Technical parameters of PTM600 portable styrene gas analyzer:

Detection gas: styrene C8H8, optional: simultaneous detection of 1 to 6 types, up to 18 types of gas and temperature and humidity measurement, depending on the sensor and the site environment

Detection range: 0-10, 50, 100, 200, 1000ppm

Sensor description: Conventional

Resolution: 0.01ppm or 0.001ppm (0～10 ppm); 0.01ppm (0～100 ppm), 0.1ppm (0～1000 ppm), 1ppm (over 0～1000 ppm), 0.1%LEL (0～99%) LEL), 0.01%Vol or 0.001%Vol (0～99.999%Vol)

Detection principle: electrochemistry, infrared, thermal conductivity, PID photoion, catalytic combustion, according to gas type, range, site environment and user needs

Sensor life: 3 years for electrochemical principle, 2 or 6 years for oxygen, 5-10 years for infrared, 3 years for catalytic combustion, 5 years for thermal conductivity, 2 years for PID

Detection method: built-in pump suction type, flow rate 800 ml/min

Display mode: 3.5-inch large-screen high-definition color display with 320X240 resolution

Detection accuracy: ≤±2% (F.S) (higher accuracy can be customized)

Linearity: ≤±2%

Repeatability: ≤±2%

Uncertainty: ≤±2%

Alarm mode: sound and light alarm, visual alarm, sound and light + visual alarm, close alarm

Response time: T90≤20 seconds

Recovery time: ≤30 seconds

Power supply: DC3.7V

Use environment: temperature -40℃~+70℃; relative humidity≤0-99%RH

Sample gas temperature: -40℃~+70℃, optional high temperature sampling cooling filter handle or high temperature and high humidity pretreatment system can detect flue gas concentration of 1300℃

Temperature display: -40℃~+70℃ (optional), accuracy 0.5℃

Humidity display: 0-99%RH (optional) accuracy 3%RH

Battery capacity: 3.7VDC, 10800mAH rechargeable polymer battery, with overcharge, overdischarge, overvoltage, and short circuit protection functions

Data storage: standard capacity of 100,000 pieces of data, optional SD card, U disk storage, unlimited capacity, support for viewing, deleting or exporting data from this machine, free host computer communication software, the storage function is off by default, and can be set to on State, storage time interval can be set arbitrarily

Communication interface: Bluetooth, USB, RS232 automatic identification

Printer: optional, built-in micro printer or external micro wireless Bluetooth printer

Wireless transmission: optional, can wirelessly transmit data to phones, remote monitoring centers, monitoring computers and other monitoring equipment, use the host computer to perform data analysis, storage, printing and other functions on the computer

Explosion-proof type: intrinsically safe

Explosion-proof mark: Exia II CT4

Protection grade: IP66, rainproof, water splash, dustproof

Dimensions: 255×210×125mm(L×H×W)

Weight: 2.5Kg

Standard accessories: manual, certificate, warranty card, USB charger (including data cable), high-grade aluminum alloy instrument case, CD (host computer communication software), 40cm stainless steel sampling handle (1 meter hose)

Optional accessories: built-in micro printer, external micro wireless infrared printer, temperature and humidity measurement function, U disk storage, wireless data communication function, high temperature sampling and cooling filter handle, high temperature and high humidity pretreatment system, external remote sampling pump, humidity Multiple dust filters, 0.9m retractable sampling handle (1m hose)

Application occasions: petroleum, chemical industry, medicine, environmental protection, flue gas analysis, air treatment and other occasions where gas concentration needs to be detected and analyzed

Sorry  There is no "Application", you can view other services。