Portable acetic acid gas analyzer PTM600-C2H4O2

Features of PTM600 portable acetic acid gas analyzer:

● Waterproof, dustproof, explosion-proof, shockproof, intrinsically safe circuit design, anti-static, anti-electromagnetic interference,

Passed national standard test and CPA form approval

●Protection level IP66, built-in water vapor and dust filter to prevent damage to sensors and instruments due to water vapor and dust

●Built-in pump suction measurement, optional professional accessories for high temperature, high humidity, high dust environment, rapid response;

●3.5-inch high-definition color screen displays real-time concentration, alarm, time, temperature, humidity, storage, communication, printing,

Information about power, charging status, etc. The menu interface uses high-definition simulation icons to display the function names of each menu

●Large-capacity data storage function, standard 100,000 data storage capacity, larger capacity can be customized. Optional SD card storage function, supports real-time storage, timing storage or only alarm concentration data and time, supports local viewing and deleting data, and can also upload data to a computer via USB, Bluetooth communication, and RS232 interface, using a host computer The software analyzes the data and stores and prints.

●Bluetooth communication interface, USB interface, RS232 interface, optional built-in printer or external wireless Bluetooth printer

Print content: company name, gas name, date and time, ambient temperature and humidity, concentration data, test results (qualified or not)

●USB charging port, can be charged by computer or power bank, compatible with phone charger, overcharge, overdischarge, overvoltage, short circuit, overheating protection, 5-level accurate power display, support USB hot swap, the detector can be normal when charging Work

●Using 10800mAH high-capacity rechargeable polymer battery, which can work continuously for a long time

●Sound and light alarm, visual alarm, under-voltage alarm, fault alarm, multi-directional three-dimensional display of alarm status when alarming.

●Alarm value can be set, the alarm mode can be low alarm, high alarm, interval alarm, weighted average alarm

●High-precision temperature and humidity measurement (optional), while temperature compensation is performed on the sensor. The temperature range of the instrument is -40 to 70 degrees,

Can detect 1300 degrees of gas (optional high temperature sampling cooling filter handle or high temperature and high humidity pretreatment system)

●Support automatic switching between high and low ranges (please specify when ordering).

●Real-time detection or timing detection is possible (for the case where the amount of the gas to be measured is relatively small), the pump can be turned off when it is not detected to extend the startup time.

●It can detect 1 to 6 kinds of gases at the same time, and it can be expanded to 24 kinds of gases at the same time. The units can be switched freely. Normal gases do not need to enter the molecular weight, and the molecular weight of special gases needs to be automatically calculated and switched. Units are optional: PPM, mg/m3, Vol%, LEL%, PPHM, ppb, mg/L

●Three display modes can be switched: display the concentration of four gases at the same time, the concentration of a single channel gas and the real-time curve can be displayed in a large font cycle, and the automatic cycle or manual cycle between the channels can be switched. Gas name, you can view the history curve graph.

●Chinese and English interface can be selected, the default Chinese interface, concise Chinese or English operation prompts

●Data recovery function, selective recovery or full recovery, automatic identification and prevention of misoperation of concentration calibration, to avoid defects caused by human factors

●Zero point automatic tracking, multi-level calibration of target points to ensure linearity and accuracy of measurement.

Technical parameters of PTM600 portable acetic acid gas analyzer:

Detection gas: Acetic acid C2H4O2, optional: simultaneous detection of 1 to 6 kinds, up to 24 kinds of gases and temperature and humidity measurement, depending on the sensor and the site environment

Detection range: 0-10, 100ppm, other ranges can be customized

Resolution: 0.01ppm higher resolution can be customized

Detection principle: electrochemistry, other principles are optional, according to gas type, range, site environment and user needs

Sensor life: 2-3 years

Detection method: built-in pump suction type, flow rate 800 ml/min

Display mode: 3.5-inch large-screen high-definition color display with 320X240 resolution

Detection accuracy: ≤±2% (F.S) (higher accuracy can be customized)

Linearity: ≤±2%

Repeatability: ≤±2%

Uncertainty: ≤±2%

Alarm mode: sound and light alarm, visual alarm, sound and light + visual alarm, close alarm

Response time: T90≤20 seconds

Recovery time: ≤30 seconds

Working power supply: DC3.7V

Use environment: temperature -40℃~+70℃; relative humidity≤0-99%RH

Sample gas temperature: -40℃~+70℃, optional high temperature sampling cooling filter handle or high temperature and high humidity pretreatment system can detect flue gas concentration of 1300℃

Temperature display: -40℃~+70℃ (optional), the accuracy is 0.5℃

Humidity display: 0-99%RH (optional) accuracy 3%RH

Battery capacity: DC3.7V, 10800mAH rechargeable polymer battery, with overcharge, overdischarge, overvoltage, and short circuit protection functions

Data storage: standard capacity of 100,000 pieces of data, optional SD card, capacity 32G, support local viewing, deleting or data export, the storage function is off by default, and can be set to on, and the storage time interval can be set at any time

Communication interface: Bluetooth, USB, RS232, RS485 optional

Printer: optional, built-in micro printer or external micro wireless Bluetooth printer

Wireless transmission: optional, can wirelessly transmit data to phones, remote monitoring centers, monitoring computers and other monitoring equipment, use the host computer to perform data analysis, storage, printing and other functions on the computer

Explosion-proof type: intrinsically safe

Explosion-proof mark: Exia II CT4Ga

Protection grade: IP66, rainproof, water splash, dustproof

Dimensions: 255×210×125mm(L×H×W)

Weight: 2.5Kg

Standard accessories: manual, certificate, warranty card, USB charger (including data cable), high-grade aluminum alloy instrument case,

CD (host computer communication software), 40cm stainless steel sampling handle (1 meter hose)

Optional accessories: built-in micro printer, external micro wireless Bluetooth printer, temperature and humidity measurement function, wireless data communication function,

High-temperature sampling and cooling filter handle, high-temperature and high-humidity pretreatment system, external remote sampling pump, multiple humidity and dust filters,

0.9m retractable sampling handle (1m hose)

Application occasions: petroleum, chemical industry, medicine, environmental protection, flue gas analysis, air treatment and other occasions where gas concentration needs to be detected and analyzed

Sorry  There is no "Application", you can view other services。