Portable sulfuryl fluoride detector MS600-SO2F2

Features of MS600 portable sulfuryl fluoride detector:

● Completely waterproof, dustproof, explosion-proof, shockproof, intrinsically safe circuit design, anti-static, anti-electromagnetic interference, passed the national standard test and CMC measurement instrument production license certification

●Protection level IP67, can prevent rain and short-term soaking, built-in replaceable water vapor and dust filter, can be used in high humidity, high dust occasions without damaging the sensor and instrument

●Built-in pump suction measurement, integrated water vapor and dust filter, optional professional accessories for high temperature, high humidity, high dust environment, rapid response; special road design, the sampling distance is greater than 10 meters.

●The high-definition 2.5-inch color screen displays real-time concentration, alarm, time, temperature, humidity, storage, communication, printing, power, charging status and other information. The menu interface uses high-definition simulation icons to display the function names of each menu

●Large-capacity data storage function, support 100,000 data storage capacity, larger capacity can be customized. Optional SD card storage function, supports real-time storage, timing storage or only alarm concentration data and time, supports local viewing and deleting data, and also uploads data to a computer via USB, infrared communication, and RS232 interface, using a host computer The software analyzes the data and stores and prints. Support remote wireless transmission (optional function)

●Bluetooth communication interface (optional), USB interface, RS232 interface automatic identification, optional external micro wireless Bluetooth printer, printing: company name, gas name, date and time, ambient temperature and humidity, concentration data, test results (qualified or not )

●USB charging port, can be charged by computer or power bank, compatible with phone charger, overcharge, overdischarge, overvoltage, short circuit, overheating protection, 5-level accurate power display, support USB hot swap, the detector can be normal when charging Work

●Using 6000mAH large-capacity rechargeable polymer battery, which can work continuously for a long time

●Sound and light alarm, vibration alarm, visual alarm, under-voltage alarm, fault alarm, multi-directional three-dimensional display of alarm status when alarming.

●Alarm value can be set, the alarm mode can be low alarm, high alarm, interval alarm, weighted average alarm

●High-precision temperature and humidity measurement (optional), while temperature compensation is performed on the sensor. The temperature range of the instrument is -40 to 70 degrees, and it can detect gas at 1300 degrees (optional high temperature sampling cooling filter handle or high temperature and high humidity pretreatment system)

●Real-time detection or timing detection is possible (for the case where the amount of the gas to be measured is relatively small), the pump can be turned off when it is not detected to extend the startup time.

●It can be selected to detect 1 to 6 gases at the same time, up to 8 gases, and the units can be switched freely. Normal gases do not need to enter the molecular weight, and the molecular weight of special gases needs to be automatically calculated and switched. Units are optional: PPM, mg/m3, Vol% , LEL%, PPHM, ppb, mg/L

●Three display modes can be switched: display the concentration of four gases at the same time, the concentration of a single channel gas and the real-time curve can be displayed in a large font cycle, and the automatic cycle or manual cycle between the channels can be switched. Gas name, you can view the history curve graph.

●Chinese and English interface can be switched, the default Chinese interface, concise Chinese or English operation prompts, users of all ages can easily operate

●Data recovery function, selective recovery or full recovery. Misoperation of concentration calibration is automatically identified and prevented to avoid defects caused by human factors.

●Zero point automatic tracking, multi-level calibration of target points to ensure linearity and accuracy of measurement. Can meet the national standards and local metrology bureau standards at the same time

●Can record calibration log, maintenance log, troubleshooting countermeasures, reminder of the expiration of sensor life, reminder of the next concentration calibration time

Technical parameters of MS600 portable sulfuryl fluoride detector:

Detection gas: sulfuryl fluoride SO2F2, optional: simultaneous detection of 6-8 kinds of gas concentration and temperature and humidity measurement, depending on the sensor and the site environment

Detection range: 0～100ppm, 1000, 5000, 100000ppm, 99%LEL, 99%Vol optional, other ranges can be customized

Resolution: 0.01ppm or 0.001ppm (0～10 ppm); 0.01ppm (0～100 ppm), 0.1ppm (0～1000 ppm), 1ppm (over 0～1000 ppm), 0.1%LEL (0～99%) LEL), 0.01%Vol or 0.001%Vol (0～99.999%Vol)

Detection principle: electrochemistry, infrared, thermal conductivity, PID photoion, catalytic combustion, depending on gas type, range, site environment and user needs

Sensor life: 2 to 3 years for electrochemical principles, 2 or 6 years for oxygen, 5 to 10 years for infrared, 3 years for catalytic combustion, 5 years for thermal conductivity, 2 years for PID

Detection method: built-in pump suction type, flow rate 500 ml/min

Display mode: 2.5-inch 320X240 high-definition color screen display, 8-key operation

Detection accuracy: ≤±1%(F.S)

Linearity: ≤±1%

Repeatability: ≤±1%

Alarm mode: sound and light alarm, vibration alarm, visual alarm, sound and light + vibration + visual alarm, turn off the alarm

Response time: T90≤20 seconds

Recovery time: ≤30 seconds

Working power supply: DC3.7V

Use environment: temperature -40℃~+70℃; relative humidity ≤0-99%RH (built-in filter can be used in high humidity or high dust environment)

Sample gas temperature: -40℃~+70℃, optional high temperature sampling cooling filter handle or high temperature and high humidity pretreatment system can detect the flue gas concentration of 1300℃

Temperature measurement: -40℃~+70℃ (optional), accuracy 0.3℃

Humidity measurement: 0-99%RH (optional), accuracy 2%RH

Battery capacity: DC3.7V, 6000mAH high-capacity rechargeable polymer battery, with overcharge, overdischarge, overvoltage, overheat, and short circuit protection functions

Data storage: standard capacity of 100,000 pieces of data, support SD card storage, unlimited capacity, support for viewing, deleting or exporting data from this machine, free host computer communication software, storage function is off by default, can be set to open state, storage time Arbitrary setting

Communication interface: USB (charging and communication), other optional interfaces RS232, Bluetooth communication, GPRS wireless transmission, automatic identification

Printer: optional, external mini wireless Bluetooth printer

Explosion-proof type: intrinsically safe

Explosion-proof mark: Exia II CT4

Protection grade: IP67, rainproof and short-term soaking, dustproof

Dimensions: 195×77×46mm(L×W×H)

Weight: 350g

Standard accessories: manual, certificate, warranty card, USB charger (including data cable), alligator clip, lanyard, high-grade aluminum alloy instrument case, CD (host computer communication software), humidity and dust filter 1

Optional accessories: 0.9m retractable sampling handle (standard length 1 meter), temperature and humidity measurement function, external micro wireless Bluetooth printer, high temperature sampling and cooling filter handle, high temperature and high humidity pretreatment system, multiple humidity and dust filters, SD Card storage, wireless data communication

Application occasions: petroleum, chemical, pharmaceutical, environmental protection, flue gas analysis, air treatment and other occasions where gas concentration needs to be detected

Sorry  There is no "Application", you can view other services。