Handheld temperature and humidity detector MS500-TH

Features of MS500 handheld temperature and humidity detector:

● Completely waterproof, dustproof, explosion-proof, shockproof, intrinsically safe circuit design, anti-static, anti-electromagnetic interference,

Passed national standard test and CPA form approval

●Protection level IP66, can prevent rain and water splash

●Built-in pump suction measurement, integrated high-efficiency water vapor and dust filter, optional professional accessories for high temperature, high humidity, high dust environment, rapid response; special road design, rapid response.

●High-definition 2.5-inch color screen displays real-time concentration, alarm, time, temperature, humidity, storage, communication, printing,

Information about power, charging status, etc. The menu interface uses high-definition simulation icons to display the function names of each menu

●Large-capacity data storage function, standard 100,000 data storage capacity, larger capacity can be customized. Optional

SD card storage function, support real-time storage, timing storage or only alarm concentration data and time, support

This machine can view and delete data, and it can also upload data to

Computer, use host computer software to analyze data, store, and print. Support remote wireless transmission (optional function)

●Bluetooth communication interface (optional), USB interface, RS232 interface automatic identification, optional external micro wireless Bluetooth printer, printing: company name, gas name, date and time, ambient temperature and humidity, concentration data, test results (qualified or not )

●USB charging port, can be charged by computer or power bank, compatible with phone charger, overcharge, overdischarge, overvoltage, short circuit, overheating protection, 5-level accurate power display, support USB hot swap, the detector can be normal when charging Work

●Using 6000mAH large-capacity rechargeable polymer battery, which can work continuously for a long time

●Sound and light alarm, vibration alarm, visual alarm, under-voltage alarm, fault alarm, fall alarm (optional)

●Alarm value can be set, the alarm mode can be low alarm, high alarm, interval alarm, weighted average alarm

●High-precision temperature and humidity measurement (optional), while temperature compensation is performed on the sensor. The temperature range of the instrument is -40 to 70 degrees, and it can detect gas at 1300 degrees (optional high temperature sampling cooling filter handle or high temperature and high humidity pretreatment system)

●Real-time detection or timing detection is possible (for the case where the amount of the gas to be measured is relatively small), the pump can be turned off when it is not detected to extend the startup time.

●It can detect 1～5 kinds of gases at the same time, and the units can be switched freely. Normal gases do not need to enter molecular weight, and special gases need to enter molecular weight automatically.

Calculate and switch, the unit is optional: PPM, mg/m3, Vol%, LEL%, PPHM, ppb, mg/L

●Three display modes can be switched: display the concentration of six kinds of gas at the same time, the concentration of the single channel gas and the real-time curve are displayed in a large font cycle, each channel

It can be switched between automatic cycle or manual cycle. You can set whether to display the maximum value, the minimum value, and the gas name, and you can view the history curve graph.

●Chinese and English interface can be switched, the default Chinese interface, concise Chinese or English operation prompts

●Data recovery function, selective recovery or full recovery. Misoperation of concentration calibration is automatically identified and prevented.

●Zero point automatic tracking, multi-level calibration of target points to ensure linearity and accuracy of measurement.

Technical parameters of MS500 handheld temperature and humidity detector:

Gas detection: temperature and humidity, optional: simultaneous detection of 1 to 5 gas concentrations and temperature and humidity measurement, depending on the sensor and the site environment

Detection range: 0-10, 100ppm, other ranges can be customized

Resolution: 0.01ppm higher resolution can be customized

Detection principle: electrochemistry, other principles are optional, according to gas type, range, site environment and user needs

Sensor life: 2-3 years

Detection method: built-in pump suction type, flow rate 500 ml/min

Display mode: 2.5-inch 320X240 high-definition color screen display, 8-key operation

Detection accuracy: ≤±1%(F.S)

Linearity: ≤±1%

Repeatability: ≤±1%

Alarm mode: sound and light alarm, vibration alarm, visual alarm, sound and light + vibration + visual alarm, turn off the alarm

Response time: T90≤20 seconds

Recovery time: ≤30 seconds

Power supply: DC3.7V

Use environment: temperature -40℃~+70℃; relative humidity ≤0-99%RH (built-in filter can be used in high humidity or high dust environment)

Sample gas temperature: -40℃~+70℃, optional high temperature sampling cooling filter handle or high temperature and high humidity pretreatment system can detect the flue gas concentration of 1300℃

Temperature measurement: -40℃~+70℃ (optional), accuracy 0.3℃

Humidity measurement: 0-99%RH (optional), accuracy 2%RH

Battery capacity: DC3.7V, 6000mAH high-capacity rechargeable polymer battery, with overcharge, overdischarge, overvoltage, overheat, and short circuit protection functions

Data storage: Standard capacity of 100,000 pieces of data, support SD card storage, unlimited capacity, support for viewing, deleting or exporting data from this machine, with host computer communication software, the storage function is closed by default, and can be set to open, storage time Arbitrary setting

Communication interface: USB (charging and communication), other optional interfaces RS232, Bluetooth communication, GPRS wireless transmission, automatic identification

Printer: optional, external mini wireless Bluetooth printer

Explosion-proof type: intrinsically safe

Explosion-proof mark: Exia II CT4 Ga

Protection level: IP66, rain and water splash

Dimensions: 195×77×46mm(L×W×H)

Weight: 350g

Standard accessories: manual, certificate, warranty card, USB charger (including data cable), alligator clip, lanyard, high-grade aluminum alloy instrument case,

CD (host computer communication software), humidity and dust filter 1

Optional accessories: 0.9m retractable sampling handle (standard length 1 meter), temperature and humidity measurement function, external micro wireless Bluetooth printer, high temperature sampling and cooling filter handle, high temperature and high humidity pretreatment system, multiple humidity and dust filters, SD Card storage, wireless data communication

Application occasions: petroleum, chemical, pharmaceutical, environmental protection, flue gas analysis, air treatment and other occasions where gas concentration needs to be detected

Sorry  There is no "Application", you can view other services。