MS600 portable toxic and harmful gas detector (built-in pump suction type)

Features of MS600 Toxic and Harmful Gas Detector:

●Completely waterproof, dustproof, explosion-proof, shockproof, intrinsically safe circuit design, anti-static, anti-electromagnetic interference, passed the national standard test and CPA measuring instrument type certification

●Protection level IP67, can prevent rain and short-term soaking, built-in replaceable water vapor and dust filter, can be used in high humidity, high dust occasions without damaging the sensor and instrument

●Built-in pump suction measurement, rapid response, sampling distance of more than 10 meters, special gas path design, optional related accessories can detect negative pressure or positive pressure -0.5 ~ 2 kg of gas, no effect on the measurement result

●The high-definition 2.5-inch color screen displays real-time concentration, alarm, time, temperature, humidity, storage, communication, printing, power, charging status and other information. The menu interface uses high-definition simulation icons to display the function names of each menu

●Large-capacity data storage function, larger capacity can be customized. Optional SD card storage function, supports real-time storage, timing storage or only alarm concentration data and time, supports local viewing and deleting data, and can also upload data to a computer via USB, infrared communication, and RS232 interface, using a host computer The software analyzes the data and stores and prints. Support remote wireless transmission (optional function)

●Infrared communication interface (optional), USB interface, RS232 interface, automatic identification, optional external micro wireless infrared printer, printing: company name, gas name, date and time, ambient temperature and humidity, concentration data, test results (qualified or not )

●USB charging port, can be charged by computer or power bank, compatible with phone charger, overcharge, overdischarge, overvoltage, short circuit, overheat protection, 5-level accurate power display, support USB hot plug, the tester can be normal when charging Work

●Using 6000mAh large-capacity rechargeable polymer battery, which can work continuously for a long time

●Sound and light alarm, vibration alarm, visual alarm, under-voltage alarm, fault alarm, multi-directional three-dimensional display of alarm status when alarming.

●Alarm value can be set, the alarm mode can be low alarm, high alarm, interval alarm, weighted average alarm

●High-precision temperature and humidity measurement (optional), while temperature compensation is performed on the sensor, the instrument uses a temperature range of -40 to 70 degrees, and can detect gas at 1300 degrees (optional high temperature sampling cooling filter handle or high temperature and high humidity pretreatment system)

●Real-time detection or timing detection is possible (for the case where the amount of the gas to be measured is relatively small), the pump can be turned off when it is not detected to extend the startup time.

●Optional simultaneous detection of 1 to 6 kinds of gases, up to 8 kinds of gases, free switching of units, regular gases do not need to enter the molecular weight, special gases need to enter the molecular weight and automatically calculate and switch, the unit is optional: PPM, mg/m3, Vol% , LEL%, PPHM, ppb, mg/L

●Three display modes can be switched: display the concentration of four gases at the same time, the concentration of a single channel gas and the real-time curve can be displayed in a large font cycle, and the automatic cycle or manual cycle between the channels can be switched. Gas name, you can view the history curve graph.

●Chinese and English interface can be switched, the default Chinese interface, concise Chinese or English operation prompts, users of all ages can easily operate

●Data recovery function, selective recovery or full recovery. Misoperation of concentration calibration is automatically identified and prevented to avoid defects caused by human factors.

●Zero point automatic tracking, multi-level calibration of target points to ensure linearity and accuracy of measurement. Can meet the national standards and local metrology bureau standards at the same time

●Can record calibration log, maintenance log, troubleshooting countermeasures, reminder of the expiration of sensor life, reminder of the next concentration calibration time

Technical parameters of MS600 toxic and harmful gas detector:

Detection gas: toxic gas, oxygen, carbon dioxide, flammable and explosive gas, TVOC, etc., any combination of 1 to 6 gases. It can be expanded to 8 kinds of gases, depending on the sensor, optional: temperature and humidity measurement.

Application occasions: petroleum, chemical, pharmaceutical, environmental protection, gas distribution, storage, flue gas analysis, air treatment and other occasions that require portable and rapid gas concentration detection.

Detection range: 0～1, 10, 100, 1000, 5000, 50000, 100000ppm, 200mg/L, 99%LEL, 20%, 50%, 99.999%, 99%Vol optional, other ranges can be customized.

Resolution: 0.01ppm or 0.001ppm (0～10 ppm), 0.01ppm (0～100 ppm), 0.1ppm (0～1000 ppm), 1ppm (over 0～1000 ppm), 0.01 mg/liter (0～200 %Mg/L), 0.1%LEL, 0.01%, 0.001%Vol

Detection principle: electrochemistry, catalytic combustion, infrared, thermal conductivity, PID photoion, etc., depending on the gas type, range, site environment and user needs.

Allowable error: ≤±1%F.S (other accuracy can be customized)

Linearity: ≤±1%

Repeatability: ≤±1%

Uncertainty: ≤±1%

Response time: T90≤20 seconds Recovery time: ≤30 seconds

Working environment: temperature: -40℃～+70℃, humidity: ≤10～95%RH, built-in filter can be used in high humidity or high dust environment

Sample gas temperature: -40℃~+70℃, optional high temperature sampling cooling filter handle, can detect the flue gas concentration of 1300 degrees

Temperature and humidity measurement: optional: temperature -40℃~+70℃, accuracy 0.5℃; humidity 0～99%RH, accuracy 3%RH

Power supply: 3.7VDC, 6000mAh high-capacity rechargeable polymer battery

Display mode: 2.5-inch high-definition color screen

Detection method: built-in pump suction measurement, flow rate 500 ml/min. The calibrated flow rate should be greater than 500 ml/min, and a three-way pipe should be connected for diversion to ensure that excess gas is discharged from the bypass.

Alarm mode: sound and light alarm, vibration alarm, sound and light + vibration alarm, close alarm can be set

Alarm volume: 90 ~ 120 decibels.

Communication interface: USB (charging and communication), optional: RS232, infrared communication, automatic identification

Data storage: standard large-capacity data storage, support expansion.

Protection level: IP67

Explosion-proof type: intrinsically safe

Explosion-proof mark: Ex ia IIC T4 Ga

Executive standard: GB 15322.3-2019 "Portable combustible gas sensor with a measuring range of 0-99% LEL"

GB 3836.1—2010 "General Requirements for Electrical Equipment for Explosive Gas Atmospheres"

GB 3836.4—2010 "Electrical Equipment for Explosive Gas Environment Intrinsically Safe "i""

Dimensions: 195×77×46mm(L×W×H)

Weight: 350g (different gas combinations, slightly different)

Standard accessories: manual, certificate, warranty card, USB charger (including data cable), high-grade aluminum alloy instrument case, back clip, humidity and dust filter

Optional items: temperature and humidity measurement function, 1.2 m retractable sampling handle (1-10 m hose, standard length 1 m), 0.4 m stainless steel sampling handle (with dust filter, not retractable), high temperature sampling cooling filter handle, High temperature and high humidity pretreatment system, multiple humidity and dust filters, lanyard, CD (host computer communication software), SD card storage, wireless data communication, external micro wireless Bluetooth printer

Sorry  There is no "Application", you can view other services。