Zetron ZKD601B Light And Sound Alarm Carbon Monoxide/CO gas Leak Alarm Detector

ZKD601B Carbon Monoxide Alarm 

OVERVIEW

FEATURES 

HIGH SENSITIVITY

1. MCU processing and SMT Manufacture Technology

2. High reliable electrochemical sensor.

3. When the concentration of CO reaches the alarm setting value, the detector emits an audible and visual alarm indication.

AUTOMATIC SELF-TEST FUNCTION

1. This CO alarm has automatic self-test function to detect ant failure of hardware, which is performed about every 1minute in            normal standby status.

2. Green: power indicator, flashing once every 35s;

   Red:alarm indicator, flashing 100ms on/100ms off;

   Yellow:fault indicator, once detect the fault or failure, the buzzer sounds 2 times per 1s.

LOW POWER STANDBY

1. 3*1.5V AA battery.

2. Low current consumption, ultra-long standby time

3. After install the battery, the detector starts to warm up for 40s.

Easy Installation

1.First, determine whether the gas to be detected is lighter or heavier than air.

2.Gas that is heavier than air: liquefied petroleum gas, etc.

3.Gas that is lighter than air: natural gas, artificial gas, biogas, etc.

4. When detecting gas heavier than air: Install natural gas alarm detector 0.3 m above the ground, within 1.5 m from the air source radius.

5. When detecting gas lighter than air: Install natural gas alarm detector 0.3-1.0 m below the ceiling and within 1.5 m from the air source radius.

The device is highly sensitive, can respond quickly, accurate measurement of low level concentration of smoke.

It's suitable for homes, office buildings, factories, schools, hotels, warehouses, entertainment places, trains etc.