Online Composite Fixed Type Toxic and Harmful Gas Monitor MIC600

MIC600 Fixed Online Gas Monitor

OVERVIEW

FEATURES

Fast and Efficient Gas Detection  Function
① It can be used in 24 hours continuous online monitoring of multi field gas concentration ,up to 6 gases and the types for detection are more than 500 types. 
② There are 7 gas units to display, and the units can be switched freely. Units that can be selected: PPM, mg/m3, Vol%, LEL%, PPHM, ppb,  mg/l.

Rich Human-machine Interface
① 2.5-inch high-definition color screen.
② Simultaneously display the concentrations of 6 types of gases, repeatedly display the concentration of  single-channel gases in large font, and display the real-time curve.

Diversified Data Communication Methods
① It is possible for the real-time monitoring via the wired or remote wireless transmission, and network transmission.
② Three-wire system 4 ~ 20mA standard signal and standard bus RS485 (modbus-RTU) simultaneous output.
③ It is possible to select frequency output 200-1000Hz, Hart protocol signal, 1 ~ 5V output, two-wire system 4 ~ 20mA, SMS alarm, wireless transmission (2 ~5 km or unlimited distance).
④ It is compatible with secondary instrument, data acquisition module, PLC, DCS system, ａnd it is possible to drive the related equipment.

Powerful and Convenient Humanized Function
① Multiple alarm modes, and multi-directional and three-dimensional indication alarm states. It includes: 2 sets of relay switch output, sound & light alarm (optional configuration), ａnd display screen visual alarm. Alarm types include: concentration alarm, and failure alarm. Multiple alarm mode settings: low alarm, high alarm, interval alarm, and weighted average alarm.
② Zero-point automatic tracking; long-term use will not be affected by the zero drift.

③ Multi-level calibration for target points, can ensure the linearity and accuracy of the measurements.
④ Log recording Record the calibration logs, repair logs, failure history, failure countermeasure solutions, sensor service life due reminder, and function of reminder for the time of next concentration calibration.
⑤ Data recovery function; in case of mis-operation, it is possible to select partial or full recovery.
⑥ Mis-operation recognition function: automatic recognition and prevention of the concentration calibration mis-operation,   which is possible to avoid the poor performance that may be caused by human factors.

Infrared Remote Control
① Standard configuration includes the infrared remote control, it is possible for one-key operation via infrared remote control function key, which can achieve the operation without opening the cover under hazardous situations.such as: the functions like modification of the alarm point, density calibration, zero-point calibration, noise reduction,   restoring the factory setting, and so on.

Multiple Optional Functions, Meet the Personalized Needs
■ Integrated sound & light alarming device, split-type sound & light alarming device, 24V DC stabilized voltage power supply.

■ Wireless transmission
① It is possible to transfer data wirelessly to the cell phone, remote monitoring center, monitoring computers and other monitoring equipment, which will utilize the upper-level host to realize the functions of data analysis, storage, printing or the like on the computer.

■ Pretreatment system
① Room temperature and high humidity pretreatment system
② High temperature and high humidity pretreatment system
③ High temperature and high humidity and high dust pretreatment system
 
■ Accessory for connection with computer for monitoring
① Free upper-level host software, RS485 / RS232 converter
② For laptop without RS232 interface, USB / RS232 converting and connecting cable is needed, if the network transmission is needed, TCP / IP converter will be further needed.

■ Installation type accessories
① wall mounting bracket;
② mounting clips for fixation on the pipes (1/2", 3/4" pipe);
③ stainless steel threaded welding seat or flange to be installed on the pipeline (it is necessary to mark the flange or pipe size, such as DN50, DN15 ...);
④ Rain cover;
⑤ 24VDC or 220AC sampling pump (sampling distance is 10 m);
⑥ vacuum pump (sampling distance is greater than 40 m);
⑦ 24V switching power supply;
⑧ pressure reducing valve;
⑨ flow meters.

All the cases which requires the fixed installation, and online detection of gas concentrations such as Chemical Industry, Power Generation Plants, Natural Gas Pipeline & Processing,Pulp & Paper Industry, Waste Water Treatment Plants, Commercial & Industrial HVAC, Acetylene Gas Bottlers & Users , Ice Skating & Hockey Arenas,Cannabis & Hemp Oil, Breweries and so on.