ACconstant current source, also called high current generator, is a necessaryequipment for electric power and electrical industry to be used in largecurrent location commissioning. The device has the advantages of easymaintenance, superior performance, safe and reliable use, beautiful appearance,strong and durable and convenient to move. Features.Theuse of advanced microelectronics processing technology, all the use of theprocess can be set in advance, the entire Chinese/English interface, simple andcle......
1.7-inch large-screen LCD display, with backlight, clear reading, intuitive, anddisplay voltage, current, time, etc., there are a variety of data settings,high-speed thermal printer, PC remote control current output;
2.Start / stop conditions can be arbitrarily set, you can set the time range of 1seconds to 9999 seconds;
3.High accuracy of current output: 0.5% accuracy;
4.All functions can be set through the touch screen, improve product safety,intelligent work the whole process;
5.Optional automatic up-flow test, manual up-flow test and the impact ofquick-break test, flexible and simple operation;
6.Real-time display output current, time results, display intuitive and clear;
7.Perfect over-current protection, arbitrarily set the target output currentvalue, the current limit and resistance to flow time;
8.With zero detection function, to be determined after the return to zero fortesting, safe and reliable;
9.Can set the output frequency 50/60 / 45-65Hz;
10.Fault alarm, fault memory function;
11.DSP control, stable performance, strong anti-interference, to adapt to harshelectromagnetic environment;
12.Product small size, light weight, reasonable structure, reliable and durable;
13.Using Atmel microcontroller chip to control;
14.Infineon module used to enhance the reliability of the system;
15.With the input and output disconnect switch, emergency stop operation switch;
16.With advanced monitoring functions;
17.With overload, short circuit, power grid fault and other abnormal protectionand alarm function;
18. User-friendlyoperation interface, the Chinese menu, you can display the operation of theequipment data, real-time fault data, historical fault data, and equipment workstatus;
19. Canprovide RS485 remote communication interface, follow the Modbus communicationprotocol;
Type | HL-2000 | HL-5000 | HL-10000 |
Input | Input voltage | 220V | 380V |
Voltage Range | +30% |
Output | Phase | Single |
Rated Voltage | 6V |
Current | 2000A | 5000A | 10000A |
Current accracy | <1.5% |
Frequency | 50/60/45-65Hz |
Temperature accracy | 0.5% |
Frequency stability | ±1% |
Dynamic performance | Dynamic transient recovery time<80mS |
Distortion factor | Sine wave,THD<1% |
Resistance to flow time range | 0~9999S |
Impact scope of timing | 0~999mS |
Display | Operation display | 7in touch screen |
Dispaly accracy | Voltage±1%FS,Current±1.5%FS |
Protection | Overheat, over current, over load |
Output Teminal | Cu busbar |
Insulation resistance | ﹥2M(500VDC) |
Dielectric strength | 2KVDC(In to G,out to G, In to Out),no more than 1 min |
Temperature | Working temp | -25℃~55℃ 20-80%RH |
Storage temperature | -40℃~65℃ |
Reletive humidity | 0-95%RH,without moisture condensation |
Size(D*W*H)mm | 320*490*500 | 660*450*750 | 830*458*1100 |