
Honeywell
HERMetic UTImeter Rtex
Rtex
The HERMetic UTImeter Rtex is aportable liquid level gauge designed for restricted gauging of petroleumproducts. The unit is used for custody transfer, inventory control measurementand free water detection on marine vessels and shore tanks. The HERMeticUTImeter Rtex has to be connected to a HERMetic vapour control valve fixed onthe tank.
The unit enables 3, optionally 4measurements in one single operation:
• Ullage
• Temperature
• Oil-Water interface level
• Innage, Reference height (Viscversion)
A gauge dedicated to your application:
HERMetic UTImeter Rtex
• with 1" sensing probe, FKM gaskets for the main applications inhydrocarbons.
HERMetic UTImeter Rtex Visc
• with 2 Inch load on the sensing probe, recommended for operation in highviscous products or for innage measurements in hydrocarbons.
• Manual detection of tank bottom.
All HERMetic UTImeters are nowequipped with the sensor “ ULTRA “ for use in low and high viscous liquids.The
ULTRA sensing probe consists of astainless steel tube terminated by a PEEK head. The sensing probe includes anultrasonic liquid level sensor, a temperature sensor and a conductivityelectrode. The sensitivity for ullage and interface measurement does notrequire any adjustment. The sensor is calibrated once at the factory and does notrequire subsequent calibration. The temperature transducer is a RTD element.The characteristics of the RTD element are stored inside the sensor. The sensoris sending true temperature values to the electronic box and display.
Technical specifications:
Accuracy ofullage-interface detection: ± 2mm (± 0.08" approx.)
Ullage, interfaceindication: Audible and Visible selectable
Tape length: 15 m/50ft, 30 m/100 ft, 35 m/115 ft
Tape graduation:Metric/English
Tape resolution: 1 mm/ 1/16"
Tape accuracy: ± 1.5 mm/30 m (±1/16"/100 ft approx.)
Meets APIMPMS Chap 3.1A and ISO 4512 requirements
Temperature accuracy: ± 0.1°C (0°Cto 70°C);
Meets APIMPMS Chap 7 request ±0.2°F (32°F to 158°F)
Meets ISO4268 , IP PMM Part IV
Ambient temperature range:-20°C to 50°C / (-4°F to 122°F)
Temperature sensormeasurement range: -40°Cto 90°C / (-40°F to 194°F)
Temperaturemeasurement resolution: 0.01° or0.1°selectable
Temperature reading: °C or °F selectable
LCD Display: 8characters with backlight
Power: Approved 9Vbatteries
Weight with 15 meter /50ft tape: 3.7 kg / 8.1 Lbs.
Hazardousenvironments approvals
ATEX II 1 G Ex ia IIBT4 / Tamb 50°C
Factory Mutual CL I,DIV 1, C&D, T4 Tamb 50°Cand
CL I, ZN 0, AEx ia IIBT4 Tamb 50°C
IECEx Zone 0, Ex iaIIB T4