Honeywell HERMetic UTImeter Gtex

Honeywell
Honeywell HERMetic UTImeter Gtex
Gtex
The HERMetic UTImeter Gtex is aportable gas tight liquid level gauge designed for closed gauging ofhydrocarbons and chemicals. The unit is used for custody transfer, inventorycontrol measurement and free water detection on marine vessels and shore tanks.Connected to a HERMetic vapour control valve fixed on the tank, the HERMeticUTImeter Gtex avoids any gas release during operation.
The unit enables 3, optionally 4measurements in one single operation:
• Ullage
• Temperature
• Oil-Water interface level
• Innage, Reference height (Visc version)
A gauge in different versionsdedicated to your application:
HERMetic UTImeterGtex
• with 1" sensing probe, FKMgaskets for the main applications in hydrocarbons.
HERMetic UTImeterGtex Chem
• with 1" sensing probe, FFKM gasketsand tape connector for use in corrosive liquids.
HERMetic UTImeterGtex Visc and HERMetic UTImeter Gtex Chem Visc
• with 2 Inch load on the sensingprobe,recommended for operation in high viscous products or for innagemeasurements in hydrocarbons or in corrosive liquids.
• Manual detection of tank bottom.
IMO
Solas 74
MARPOL 73/78
ISO, API, IP
EC Directive 89/336/EEC
EC Directive 94/9/EC
EC Directive 96/98/EC
ATEX, Factory Mutual, IECEx
National authorities, (USCG, MSA,..)
All major classification societies
Installation, connection and references for the newUTImeter family are fully compatible with previous HERMetic UTI/ GT3 type ofequipment.
"A closed system exists when amarine tank vessel does not permit the direct exposure and/or release of thetank content into the atmosphere under normal operating conditions." (API MPMS17.2 A.4.1.)
Benefits:
• 100 % repeatability of measures.
• Continuous temperature reading.
• High accuracy and stability.
• Chemically resistant to corrosive liquids (Chem version).
• Easy access for battery exchange.
• Sensor exchange without need of new calibration.
• Low weight for easy operation and carry around.
• No temperature drift. No degradation of the sensitivity due to sensorageing.
• Interchangeable adapters for connection to different vapour controlvalves.
• Tape cleaning devices, window wiper and tape protection on all units asstandard.
Low maintenance cost:
Fully modular unit. Change tape, storage tube, sensor or instrument unityourself.
Easy and detailed instructions in Operation and Service Manual.