Welcome Customer !

Membership

Wuhan Huatian Electric Power Automation CO., LTD
Free Member ·1YRS
,
Other

Main Products: 电力试验设备

Xwboo>Products

HTXZ AC Resonant Test System for Cable

Model
Nature of the Manufacturer
Other
Product Category
one、High voltage insulation
Place of Origin
City, Province
Overview
Special SPWM digital waveform generator chip and advanced IPM module are adopted The reactor is dry epoxy castable Orthogonal asynchronous stationary carrier modulation
Product Details

Product Introduction

Series resonance withstand voltage equipment,By adjusting the frequency of the power supply, the reactor can realize resonance with the tested capacitor and obtain high voltage and large current on the tested product.

Series resonant voltage withstand equipment consists of frequency regulating power supply, excitation transformer, reactor, capacitor voltage divider.

product names:Variable frequency resonant、Frequency conversion series resonance、Series resonance、Series resonant transformer、Series resonance test equipment、Cable voltage series resonance device、Series resonance withstand voltage equipment

Product Parameters

Rated output voltage0 ~ 220kV(AC effective value) and below
output frequency30~300Hz
Resonance voltage waveformPure sine wave, waveform distortion rate≤1.0%
Full load working timeContinuous working time of 60min
System quality factorUnder maximum load≥20
Frequency adjust fineness0.1Hz
Instability ≤0.01%
Working power supplySingle-phase 220V or three-phase 380V±10%,Power frequency 50Hz±5%
Note:

1.The appearance of the product shall be subject to the actual product,Technical parameters with model if there are any changes,without notice.In case of misappropriation or copying, legal liability will be investigated.

2. For more information about huatian products, please enter product center .Service :qiao@hvtest.cc

Product Characteristics

  • 1、The cables of 35kV and lower voltage grade are used in large quantity and the test workload is large, so this kind of withstand voltage test device is small in volume and light in weight, thus the portable cable withstand voltage test system is born.

  • 2、This system requires that the weight of the parts that can be moved on site by a single person should not exceed 30kg, and the weight of the parts that can be moved on site by two people should not exceed 60kg, which is suitable for on-site handling.

  • 3、The power supply adopts 220V single-phase power supply or 380V single power supply, which is convenient for on-site power collection.

  • 4、The reactor adopts dry epoxy pouring, which is beautiful and reliable, suitable for all kinds of cables.

  • 5、The voltage endurance test of 110kV and above voltage grade cable adopts oil-immersed reactor. When the single weight exceeds 100kg, our company's special small electric crane can be selected.

Product Video