Hydraulic hose assembly pulse tester
Hydraulic hose assembly pulse tester
I. scope of application
1 engineering hydraulic hose;
2 aviation hoses and tubes;
3 other hard pipe or joint.
Two, the basic parameters
1 maximum pulse pressure: 100MPa (according to the need to choose any pressure file);
2 pulse frequency: 0.5~1.25Hz can be arbitrarily set;
3 pulse pressure waveform: similar to Fang Bo, T wave;
4 test medium: hydraulic oil;
5 test oil temperature: RT~150 + 2 C automatic control;
6 specimen installation: 180 degrees or 90 degrees;
7 simultaneous test pipeline: 2~8 root;
8 suitable for pipe diameter: 6~51mm.
Three, the implementation of standards
GB/T3683 steel wire reinforced hydraulic rubber hose and hose assemblies;
"GB/T5568 rubber, plastic hose and hose assemblies without flexing Hydraulic impulse test";
Test method for GB 7939 hydraulic hose assemblies;
"ISO 6803 rubber or plastics hoses and hose assemblies without flexing Hydraulic impulse test";
Brake hose assemblies for hydraulic braking systems for road vehicles using non petroleum base brake fluid GB/T7127;
Four, the main functions and features
1 main components are imported components, safe and reliable;
2 internal layout appearance, reasonable structure, with non welded pipe connections, to prevent leaking, and convenient maintenance;
3 can be installed at the same time 2~8 road test pieces, the use of two groups of installation, installation distance can be adjusted according to the minimum bending radius of the hose;
4 automatic shutdown protection function of the test piece, suitable for unattended;
5 with different fixture for the rapid assembly of hose assembly;
6 over temperature, over pressure, leakage alarm shutdown, open the door can not be tested, in case of automatic shutdown and other safety protection function.