Welcome Customer !

Membership

XwbooMachine Tool AccessoriesMachine Tool Functional PartsMotor0.37 Kw 3 Phase Motor
  • $item.Title
  • $item.Title

0.37 Kw 3 Phase Motor

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
Motor
Place of Origin
,
The Y2 series 0.37 kw 3 phase motor is an updated product of the Y series motor and is a general-purpose fully enclosed self-fan-cooled squirrel-cage three-phase asynchronous motor.

Product Introduction

The Y2 series 0.37 kw 3 phase motor is an updated product of the Y series motor and is a general-purpose fully enclosed self-fan-cooled squirrel-cage three-phase asynchronous motor. It is the latest product in my country in the 1990s, and its overall level has reached the level of similar foreign products in the early 1990s. The product is used in various fields of the national economy, such as machine tools, water pumps, fans, compressors, and can also be used in transportation, mixing, printing, agricultural machinery, food and other occasions that do not contain flammable, explosive or corrosive gases.


Product Detail



Motor Type: 0.37 kw 3 phase motor

Output Power: 0.18 kW - 315 kW

Frame Size: IEC 63 - 355

Number of Poles: 2, 4, 6, 8

Rated Voltage: 380V (can be adjusted according to customers)

Frequency: 50 or 60 Hz

Protection Level: IP54 or IP55

Energy Efficiency Index: IE1 / IE2 / IE3

Insulation Class: B or F

Cooling Method: ICO141

Wiring Connection: Y connection below 3kW, △ connection above 4kW

Working Mode: Continuous (S1)


Product Parameter (specification)



0.37 kw 3 phase motor

Type

Power (KW)

Full Load

Rated Torque Tn(N*m)

Ist/In

Tst/Tn

Tmax/Tn

Current (A)

Speed(r/min)

Eff(%)

Power Factor

3000rpm.2 poles

Y2-633-2

0.37

1.1

2760

63.8

0.73

1.31

6.1

2.3

2.5

Y2-711-2

0.37

1.12

2720

63.8

0.76

1.28

6.1

2.3

2.5

1500rpm.4 poles.

Y2-712-4

0.37

1.24

1360

66.1

0.66

2.57

6.1

2.3

2.5

1000rpm.6 poles

Y2-80M1-6

0.37

1.43

880

59.8

0.71

3.98

4.8

1.8

2.1

750rpm.8 poles

Y2-90S-8

0.37

1.92

670

49.8

0.62

5.36

4.1

2.3

1.8


Production Features



image002

image006

Know More Us


image006

Why Us



image008


Service and Packing


image009

FAQ



The common causes of motor overheating are as follows:

① The ambient temperature is too high. When the ambient temperature is high (generally more than 35°C), the heat dissipation efficiency of the motor will decrease. If the output power of the motor is not reduced at this time, the temperature of the motor will increase.

② Excessive dust inside the motor and the shell affects the heat dissipation.

③The fan is damaged or the fan is installed upside down, and the cooling air volume is reduced.

④ The hot air discharged by the motor cannot be quickly dissipated and cooled, and is immediately sucked into the interior by the motor fan, causing thermal circulation to overheat the motor.


Troubleshooting:

To avoid similar accidents, the following measures should be taken.

① In places with a lot of dust, open-type or protective (J-type) motors should not be used.

②The dust and sundries in the ventilation duct of the motor should be cleaned frequently to keep the ventilation and heat dissipation of the motor in good condition.

③ Once it is found that the voltage of the motor is normal and the load current does not exceed the rated current value, the temperature rise should be shut down for inspection, and if necessary, it should be disassembled for inspection and cleaning. Don't start production blindly before finding out the reason for the increase in temperature. If it is determined that the ventilation is poor, the operation monitoring should be strengthened when the machine is turned on after cleaning, and the temperature rise does not increase after 2 hours after the machine is turned on and the load is added, and the fault can be considered as having been eliminated.


Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend