Welcome Customer !

Membership

XwbooMachine Tool AccessoriesMachine Tool Functional PartsMotor3kw 3 Phase Motor
  • $item.Title
  • $item.Title

3kw 3 Phase Motor

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
Motor
Place of Origin
,
MS series aluminum housing 3kw 3 phase motor is made of superior materials and conform to the IEC standard.

Product Introduction

MS series aluminum housing 3kw 3 phase motor is made of superior materials and conform to the IEC standard. MS motors have good performance, low noise, safety, reliable operation and nice appearance. It can be maintained very conveniently. This motor has advantages of little vibration, light weight and simple construction. These motor can be used for general drive such as water pumps, water treatment, road machinery, petroleum, chemical, metallurgy, cement and paper industries.


Product Detail



Motor Type: 3 phase 3kw motor

Output Power: 0.06 kW - 18.5 kW

Frame Size: IEC Frame 56 - 160

Number of Poles: 2 / 4 / 6 / 8

Voltage: 220/380V, 380/660V, 230/400V, 400/690V

Frequency: 50 & 60 Hz

Protection Level: IP54 / IP55

Energy Efficiency Rating: IE1 / IE2 / IE3

Insulation Class: B/F

Cooling Method: IC411

Working System: S1


Product Parameter (Specification)



Type

Power (KW)

Rated Current (A)

Speed (r/min)

Eff (%)

Power Factor CosØ

Rated Torque Tn(N*m)

Tst/Tn

Tmax/Tn

Ist/In

220V

380V

660V

230V

400V

690V

3000rpm.2 poles

MS2-100L-2

3

10.7

6.18

3.57

10.19

5.88

3.4

2880

84.6

0.87

9.95

2.3

2.3

7.8

1500rpm.4 poles

MS2-100L2-4

3

11.37

6.56

3.79

10.83

6.25

3.61

1440

85.5

0.81

19.9

2.3

2.3

7.5

1000rpm. 6 poles

MS2-132S-6

3

13.13

7.58

4.38

12.51

7.22

4.17

960

83.3

0.72

29.84

2

2.1

6.4



Production Features


image001

Know More Us


image006

Why Us


image008

Service and Packing


image009

Motor cooling system



The air-cooled motor has a simple structure and low cost; its disadvantage is that the cooling effect of air is poor, and the friction loss caused by the high-speed motor is relatively large. There are many structural types of ventilation systems using air cooling

Suction type and press-in type


According to whether the cooling air first passes through the heating part of the motor, and then through the fan, or vice versa, air-cooled systems can be divided into two types: suction type and press-in type. Since the inhaled cold air first contacts the heating part of the motor, and a fan with a larger diameter can be used, the press-in cooling air first passes through the fan, is heated by the loss of the fan, and then contacts the heating part of the motor ( In high-speed motors, the air temperature rise caused by fan loss can reach about 5°C), so the suction cooling capacity is relatively high.


In DC motors, the fans are mostly installed at the non-commutator end. For example, a press-in cooling system can prevent the carbon powder worn by the brushes from entering the motor, but at this time, most of the air volume blows through the space between the stator poles and blows the rotor. The less air volume makes it difficult for the rotor with more loss to dissipate heat. At this time, appropriate measures must be taken, such as fully relying on the air duct piece of the armature core and the blast effect of the winding end to dissipate heat.


External cooling and internal cooling

Air-cooled systems generally use external cooling or so-called surface cooling, but in order to improve the cooling capacity, there are also internal cooling methods. For example, the field winding of a hydro-generator can use air internal cooling. In foreign countries, internal air cooling has also been used on the rotor windings of turbine generators with small capacity. However, the internal cooling system has a complex structure and requires very clean cooling gas, so it is rarely used in motors that use air as the cooling medium.



Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend