Welcome Customer !

Membership

XwbooMachine Tool AccessoriesMachine Tool Functional PartsMotor5.5 Kw 3 Phase Motor
  • $item.Title
  • $item.Title

5.5 Kw 3 Phase Motor

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
Motor
Place of Origin
,
MS series aluminum housing 5.5 kw 3 phase motor is made of superior materials and conform to the IEC standard.

Product Introduction

MS series aluminum housing 5.5 kw 3 phase motor is made of superior materials and conform to the IEC standard. MS motors have good performance, low noise, safety, reliable operation and nice appearance. It can be maintained very conveniently. This series has advantages of little vibration, light weight and simple construction. It is widely used in machine tools, fans, water pumps, reducers, etc. It is an upgraded product of ordinary cast iron shell motor.


Product Detail



Model: 5.5 kw 3 phase motor

Application: general drive such as water pumps, water treatment, road machinery, petroleum, chemical, metallurgy, cement and paper industries

Original: Fujian, China

Certification: ISO9001,CE, CCC, ISO14001 etc.

Price: Negotiable

Voltage: 380V 50Hz, the voltage can be as local demand

Payment term: TT, LC

Delivery date: Negotiable

Packing: export standard

Market: Middle East/ Africa/Asia/South America/Europe/North America

Warranty: 1 year

MOQ: 1 set


Product Parameter (Specification)



5.5 kw 3 phase motor

Type

Power (KW)

Rated Current (A)

Speed (r/min)

Eff (%)

Power Factor CosØ

Rated Torque Tn(N*m)

Tst/Tn

Tmax/Tn

Ist/In

220V

380V

660V

230V

400V

690V

3000rpm.2 poles

MS2-132S-2

5.5

18.85

10.89

6.28

17.96

10.37

5.99

2900

87

0.88

18.11

2.2

2.3

8.2

1500rpm.4 poles

MS2-132S-4

5.5

20.07

11.59

6.69

19.12

11.04

6.37

1450

87.7

0.82

36.22

2

2.3

7.5

1000rpm. 6 poles

MS2-132M2-6

5.5

22.38

12.92

7.46

21.32

12.31

7.11

960

86

0.75

54.71

2

2.1

6.8


Production Features


image001

Know More Us


image006

Why Us


image008

Service and Packing


image009

Motor maintenance



Three-phase asynchronous motor maintenance

Preparation and inspection before startup

1. Check whether the grounding of the electric and starting equipment is reliable and complete, and whether the wiring is correct and good.

2. Check whether the voltage and frequency indicated on the motor nameplate are consistent with the power supply voltage and frequency.

3. Before starting a newly installed or long-term out-of-service motor, check the phase-to-phase and phase-to-ground insulation resistance of the winding. The insulating ground group should be greater than 0.5 megohm. If it is lower than this value, the windings must be dried.

4. For wound rotors, check whether the brush device on the collector ring can work normally and whether the brush pressure meets the requirements.

5. Check whether the motor rotates flexibly and whether the oil in the sliding bearing reaches the specified oil level.

6. Check whether the rated current of the fuse used in the motor meets the requirements.

7. Check whether the fastening bolts and installation bolts of the motor are tightened. After all the above inspections meet the requirements, the motor can be started. After starting the motor, run it with no load for about 30 minutes. Pay attention to observe whether the motor has abnormal phenomena. If abnormal conditions such as noise, vibration, heating, etc. are found, measures should be taken. After the situation is eliminated, it can be put into operation. When starting the wound motor, the starting rheostat should be connected to the rotor circuit. For a motor with a brush lifting mechanism, the brush should be lowered, the short-circuit device should be disconnected, the stator circuit switch should be closed, and the varistor should be moved. When the motor is close to the rated speed, lift the brush and close the short-circuit device, and the motor start is completed.


Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend