Welcome Customer !

Membership

Jiuyin Science and Technology Chengdu Co., Ltd.
Free Member ·1YRS
ChengDou,SiChuan
Manufacturer

Main Products: Oxygen Nitrogen Analyzer (Oxygen Nitrogen Hydrogen Analyzer)|Automobile Exhaust Gas Analyzer

Xwboo>Products

Jiuyin Science and Technology Chengdu Co., Ltd.Free·1YRS

  • E-mail

    sales@meas-elec.com,service@meas-elec.com

  • Phone

    028-85044052/028-85044053

  • Address

    4th floor, unit 1, building 4, District D, West Zhigu, 66, Wuxing 4th Road, Wuhou District, Chengdu City, Sichuan Province

Contact Now

HT-LH366 Humidity Analyzer

Model
Nature of the Manufacturer
Manufacturer
Product Category
Humidity analyzer
Place of Origin
City, Province
Overview
HT-LH366 Humidity Analyzer
Product Details

    Measurement Principle: Electric capacity

    Display Mode: 4 digit high-light LED, display resolution 0.1%

    Measurement Range: Volume absolute humidity: 0~40.0%VOL

    Relative humidity: 0~99%RH

    High-temperature dew point: -20℃~+100℃

    (Default: Volume absolute humidity. Only one mode can be displayed and cannot be changed once leaving the factory. Please indicate the display mode you need when ordering.)

    Measurement Accuracy: ≤±1.5%FS comprehensive accuracy, high-temperature dew point ≤±0.5℃

    Repeatability: ≤±1.0%FS

    Response Time: T90≤30S

    Output Port: 4-20mA.DC (Non-isolated output, load resistance<1KΩ)

    2 ways of programmable alarm output (Dry contact type, maximum load 220VAC/2A)

    Communication Mode: RS485 (default) or RS232

    Power Supply: AC220V±10% 50/60Hz, power dissipation< 80VA (heat tracing equipped), 20VA (heat tracing not equipped)

    Operation Temperature: Gauge head: -10℃~+50℃, probe: 0~170℃

    Protection Level: Probe material: 316F, gauge head: IP65

    Probe Length: Normal length 0.5m、1.0m、1.2m, other length is customizable (≤1.8m)

    Sensor Service Life: >24 months (under normal conditions of use)

    Instrument Weight: Net weight 8.2Kg (1.0m)

    Installation Plug-in, standard DN65 flanged mounting



    a. Integrated design makes it easy to install and is able to reduce the impact on measurement value from outer interference;

    b. Original imported sensor has high measurement accuracy, strong anti-interference capacity and rapid response speed, and it is high-temperature resistant and weak-acid resistant;

    c. Unique heating tracing design could prevent the condensation of sulfide and water vapor effectively;

    d. The menu lock function could prevent mis-operation, which may change instrument parameters and affect its performance;

    e. Automatic temperature compensation function could eliminate the impact of environmental temperature changes on the measurement value;

    f. Two-stage filter could filter dust and acid fluid effectively;

    g. The protection level of the gauge head is IP65 and is suitable for outdoor severe environment

    h. The probe is made of 316L and is strongly corrosive-resistant. Other material can be customized or spraying the probe with corrosive-resistant coat for severe application;

    i. It is easy to operate and maintain, and has a long service life;

    j. Display mode in volume absolute humidity, relative humidity and high-temperature dew point are available. (Display mode can not be changed after leaving the factory, please indicate the display mode you need when ordering.)



    It is applied to the humidity measurement of desulfurization equipment, ultra-low emission, VOC and other occasions in gas on-line continuous monitoring system CEMS, and it can also be used for humidity control in industries of wood, building materials, papermaking, chemical industry, pharmaceutical industry, tobacco, printing and dyeing, etc.

    Note: If the environment is of low temperature, high humidity and high dust, we would provide you reasonable solutions on flue gas humidity.



    Sample gas temperature

    Probe length

    Duty parameter (corrosivity, air speed, dust content, etc.)