Welcome Customer !

Membership

Jiuyin Science and Technology Chengdu Co., Ltd.
Free Member ·1YRS
ChengDou,SiChuan
Manufacturer

Main Products: Oxygen Nitrogen Analyzer (Oxygen Nitrogen Hydrogen Analyzer)|Automobile Exhaust Gas Analyzer

Xwboo>Products

Jiuyin Science and Technology Chengdu Co., Ltd.Free·1YRS

  • E-mail

    sales@meas-elec.com,service@meas-elec.com

  • Phone

    028-85044052/028-85044053

  • Address

    4th floor, unit 1, building 4, District D, West Zhigu, 66, Wuxing 4th Road, Wuhou District, Chengdu City, Sichuan Province

Contact Now

HT-LH316 Humidity Analyzer

Model
Nature of the Manufacturer
Manufacturer
Product Category
Humidity analyzer
Place of Origin
City, Province
Overview
HT-LH316 Humidity Analyzer
Product Details

    Measurement Principle: Electric Capacity

    Display Mode: 4 digit high-light LED display, display resolution 0.1%

    Measurement Range: Volume absolute humidity: 0~40.0%VOL

    Relative humidity: 0~99%RH

    High-temperature dew point: -20℃~+100℃

    (Default: Volume absolute humidity. Only one mode can be displayed and cannot be changed once leaving the factory. Please indicate the display mode you need when ordering.)

    Measurement Accuracy: ≤±1.5%FS comprehensive accuracy, high-temperature dew point ≤±0.5℃

    Repeatability: ≤±1.0%FS

    Response Time: T90≤30S

    Output Port: 4-20mA.DC (Non-isolated output, load resistance<1KΩ)

    0-10V.DC (Non-isolated output, load resistance>10KΩ)

    1 way of programmable alarm output (Dry contact type, maximum load 220VAC/2A)

    Communication Mode: RS485 (default) or RS232

    Power Supply: AC100~240V 50/60Hz, power dissipation <80VA (heat tracing equipped)

    Sample Gas Temperature: 0~170℃

    Sampling Mode: Gas in

    Heat Tracing Type: Electric heat tracing, heat tracing temperature 0~150℃

    Gas Circuit Port: NPT 1/4-Φ6 stainless-steel fitting (316L)

    Size: 110mm×220mm×228mm(H×W×D)

    Installation Hole Size: 120mm×205mm(H×W)

    Sensor Service Life: >24 months (under normal conditions of use)

    Instrument Weight: Net weight 3.5Kg

    Installation Method: Wall mounting

    a. Wall mounting is easy to mount;

    b. Original imported sensor has excellent accuracy, stable performance, long service life, and is easy to maintain, etc.;

    c. Unique heating tracing design could prevent the condensation of sulfide and water vapor effectively;

    d. The inner cavity is made of 316L and is strongly corrosive-resistant;

    e. The menu lock function could prevent mis-operation, which may change instrument parameters and affect its performance;

    f. Automatic temperature compensation function could eliminate the impact of environmental temperature changes on the measurement value to make the measurement value more accurate;

    g. Expanded function can be added to do an accurate measurement of the high-temperature dew point value;

    h. User can set 4-20mA or 0-10V to output corresponding upper and lower limits of humidity to get a more accurate analog output result;

    i. It is easy to operate and maintain and has a long service life;

    j. Display mode in volume absolute humidity, relative humidity and high-temperature dew point are available. (Only for electric capacity principle. Display mode can not be changed after leaving the factory, please indicate the display mode you need when ordering.

    It is widely used in the measurement and analysis of water vapor content before and after desulfurization of flue gas in thermal power plants, chemical plants and steel works.

    Measurement range

    Duty parameter (corrosivity, air speed, dust content, etc.)