Welcome Customer !

Membership

Jiuyin Science and Technology Chengdu Co., Ltd.
Free Member ·1YRS
ChengDou,SiChuan
Manufacturer

Main Products: Oxygen Nitrogen Analyzer (Oxygen Nitrogen Hydrogen Analyzer)|Automobile Exhaust Gas Analyzer

Xwboo>Products

Jiuyin Science and Technology Chengdu Co., Ltd.Free·1YRS

  • E-mail

    sales@meas-elec.com,service@meas-elec.com

  • Phone

    028-85044052/028-85044053

  • Address

    4th floor, unit 1, building 4, District D, West Zhigu, 66, Wuxing 4th Road, Wuhou District, Chengdu City, Sichuan Province

Contact Now

HT-TH306 Humidity Transmitter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Humidity analyzer
Place of Origin
City, Province
Overview
HT-TH306 Humidity Transmitter
Product Details

    Measurement Principle: Zirconia

    Display Mode: External display mode can be equipped, 4 digit 16-segment alphanumeric LED display (optional)

    Measurement Range: O2: 0~25.00%, H2O: 0~40.00%VOL

    Measurement Accuracy: O2≤±2.5%FS

    H2O≤±2%FS

    Repeatability: O2≤±1.5%FS

    H2O≤±2%FS

    Resolution: 0.01%

    Response Time: T90<30S

    Output Port: 2 ways of 4-20mA (Non-isolated output, load resistance<1KΩ)

    2 ways of programmable alarm output (Dry contact type, maximum load 220VAC/2A)

    Display module port

    Communication Mode: RS485 (default) or RS232

    Power Supply: DC24V±10%, 1.5A

    Environment Temperature: -10℃~+60℃

    Storage Environment Humidity: <90%RH, non-condensing

    Operation Environment Humidity: <100%RH, non-condensing

    Sample Gas Temperature: 0~200℃ (tolerable temperature of probe)

    Sampling Mode: Gas in

    Gas Inlet Pressure: Relative pressure ±5kPa, stable pressure (control the pressure within the recommended limits to make sure the flow is within 400~600mL/min)

    Gas Outlet Pressure: Free venting (under safe conditions)

    Background Gas: Flue gas (except for strong-corrosive and reducing gas)

    Sampling Port: NPT1/8-Φ6 cutting ferrule or fitting 316L (one out of two)

    Size: 165mm×173mm×52mm (H×W×D)

    Installation Size: 150mm×100mm (H×W)

    Sensor Service Life: >36 months (under normal conditions of use)

    Cable Length: 3 meters (standard)

    Instrument Weight: Net weight 2.0Kg

    Installation Method: Wall mounting


    a. It is designed in split type, and the probe can be used in occasions whose temperature is within 200℃;

    b. The original imported zirconia sensor has a high measurement accuracy, strong anti-interference capacity, a long service life and stable performance, etc.;

    c. Polymeric membrane is built inside of the probe, which could prevent fluid media affecting or even damaging the sensor;

    d. The test cavity is made of 316L and is strongly corrosive-resistant;

    e. Automatic temperature compensation could eliminate the impact of environment temperature changes on the measurement accuracy;

    f. User could set upper and lower limits of humidity or oxygen of 2 ways of 4-20mA analog output;

    g. External display module can be attached to make the operation intuitive and convenient (optional);

    h. Wall mounting is easy and convenient to install.



    The measurement of high-temperature humidity in the exhaust of oil-fried and coal-fried boiler (CEMS);

    The measurement of humidity in food processing;

    The measurement of humidity in timber, building material and paper making industry;

    The measurement and analysis of water vapor content before and after desulfurization and denitration of flue gas in thermal power plant, chemical plant and steel plant.



    Measurement media

    Display module (optional)

    Corresponding measurement range of analog output