，
MS3 series aluminum housing IE3 three phase asynchronous motor comply with the relevant regulations of the International Electrotechnical Association IEC. Good raw materials are selected and the overall design is carried out. It has the advantages of good performance, low noise, low vibration, safe and reliable operation, beautiful appearance, small size, light weight, simple structure and convenient maintenance. MS3 series can be widely used in general occasions and mechanical equipment with higher requirements that do not contain flammable, explosive or corrosive gases, such as metal cutting machine tools, woodworking machine tools, fans, water pumps, compressors, Machinery transmission equipment for agriculture, food processing, etc.
Product Detail
Motor Type: squirrel cage induction machine
Output Power: 0.75 kW - 22 kW
Ambient temperature: -15℃～40℃
Altitude: not more than 1000m
Rated voltage: 220/380/440 others for request
Rated frequency: 50Hz, 60Hz
Protection level: IP55
Insulation class: F
Cooling method: IC411
Working method: S1
Connection method: Y connection of 3kW and below, △ connection of 4kW and above
Product Parameter (Specification)
Three phase induction machine and polyphase induction machine and 3 phase induction machine and 3 phase machine
Production Features
Know More Us
Why Us
Service and Packing
FAQ
What is the upper edge and the lower edge?
In the double-layer winding, one coil is first inserted into the effective side of the lower layer in the slot, which is called the lower layer side; and the other winding is inserted into the effective side of the upper layer in the slot, which is called the upper layer side.
What is floating and sinking edges?
In a single-layer winding slot, the end of the effective edge inserted first will be pressed by the effective edge inserted later, that is, the effective edge inserted first is called the sinking edge, and the effective edge embedded later floating on the upper edge is called the floating edge .
What is hemming and hemming embedding method?
Hemming is also called hanging handle. When using the overlap method to embed the wire, one side of the coil is inserted into the slot first, and the other side needs to wait for the lower edge or sinking edge of the slot to be inserted before the wire can be embedded. In this way, in order to prevent the edge from being damaged by friction with the iron core before being embedded, it needs to be hoisted up, so it is called a hemming. The overlap rule is called the hemming rule.
