，
MY 220V 1450 rpm single phase motor is made of selected quality materials and conform to the IEC standard. MY motors have features of good performance, low noise, little vibration and safety and reliable operation. The multiple of starting torque is 0.3-0.7 (MY), 0.45-0.75 (MYT). MY motors are suitable for the occasion where there requirements of starting torque is low and long-term continuous working, such as home electric appliances, pumps, fans, and recording meters, etc.
Product Detail
Motor Type: MY 220V 1450 rpm single phase motor
Output Power: 0.06 kW - 3 kW
Frame Size: IEC 56 - 100
Number of Poles: 2 and 4
Voltage: 220V / 230V / 240V (can design based on customers` requirements)
Frequency: 50 or 60 Hz
Protection Level: IP54 or IP55
Insulation Class: B / F
Cooling Method: ICO141
Working Duty: Continuous (S1)
Product Parameter (Specification)
MY 220V 1450 rpm single phase motor
Production Features
Know More Us
Why Us
Service and Packing
FAQ
How to check and analyze when a single-phase motor fails?
Once a single-phase motor fails, it cannot be started after the power is turned on. Or it can be started, but the speed is low, the output is small, severe heat generation or large noise is produced. When a failure occurs, you can check and analyze it according to the following steps.
①Check the appearance
Check whether the motor end cover is broken, whether the rotating shaft is bent or damaged, whether the wiring is loose, whether the screws in each part are missing, whether the contacts are burned or broken, and whether the parts are complete, etc.
②Check the bearing and lubrication (grease)
Shake the shaft up and down by hａnd to check whether the bearing is loose; push the shaft axially to check whether the bearing moves; rotate the rotor by hａnd to check whether the rotor rotates flexibly, to determine whether there is a problem with the bearing or the shaft is bent or the transfer is poor. At the same time, check the amount of lubricating oil, whether it has deteriorated or dried up, and check whether the bearing is worn and the degree of wear.
