，
YC rice husking machine single phase electric motor is totally enclosed fan cooled (TEFC) heavy duty motor. The mounting dimension is fully conformed with IEC standard. YC series motors are integrated with up-to-date design, best quality materials construction and possess the features of pleasant-looking appearance, outstanding performance, easy maintenance as well as high starting torque, smooth running, low temperature, low noise and great overload performance. YC series motor are suitable for powering small type drilling machines and water pump, especially for family workshops where only single-phase current is available.
Product Detail
Motor Type: YC rice husking machine single phase electric motor
Output Power: 0.75 kW - 5.5 kW
Frame Size: IEC 90 - 132
Number of Poles: 2 / 4
Voltage: can be customized based on users
Frequency: 50 & 60 Hz
Protection Level: IP54 / IP55
Insulation Class: B / F
Cooling Method: IC411
Duty: S1 (continuous)
Use Conditions: Ambient temperature -15℃-40℃, altitude ≤1000 meters.
Product Parameter (specification)
YC rice husking machine single phase electric motor
Production Features
Know More Us
Why Us
Service and Packing
FAQ
What are the common faults of single-phase asynchronous motors?
There is noise when the single-phase motor is running
There are several electrical reasons:
① The winding polarity is wrong.
②The winding is partially short-circuited.
③The rotor conductor is disconnected, loose or broken.
④Some pieces of iron core silicon steel sheet are broken and vibrated.
There are several mechanical reasons:
① Paper scraps or debris fall into the inner cavity of the motor.
②The bearing clearance is too large.
③There are impurities or dust particles in the bearing lubricating oil (grease).
④ The axial movement of the rotor is too large.
⑤ The dynamic balance of the rotor is not well calibrated.
⑥The slot wedge is higher than the iron core or the insulating paper protrudes.
⑦The wind cooling blade is loose.
⑧The parts of the centrifugal switch are loose, causing mechanical rubbing.
⑨ The wind cover is cracked or loose.
⑩The wind hood is not installed properly, causing the wind hood to rub against the blades.
