，
YC wooden cutting machine 1 phase motor is totally enclosed fan cooled (TEFC) heavy duty motor. The mounting dimension is fully conformed with IEC standard. YC series motors are integrated with up-to-date design, best quality materials construction and possess the features of pleasant-looking appearance, outstanding performance, easy maintenance as well as high starting torque, smooth running, low temperature, low noise and great overload performance. YC series motor are suitable for powering small type drilling machines and water pump, especially for family workshops where only single-phase current is available.
Product Detail
Motor Type: YC wooden cutting machine 1 phase motor
Output Power: 0.75 kW - 5.5 kW
Frame Size: IEC 90 - 132
Number of Poles: 2 / 4
Voltage: can be customized based on users
Frequency: 50 & 60 Hz
Protection Level: IP54 / IP55
Insulation Class: B / F
Cooling Method: IC411
Duty: S1 (continuous)
Use Conditions: Ambient temperature -15℃-40℃, altitude ≤1000 meters.
Product Parameter (specification)
YC wooden cutting machine 1 phase motor
Production Features
Know More Us
Why Us
Service and Packing
FAQ
What are the reasons for the failure of the centrifugal switch of the single-phase asynchronous motor?
The common faults of the centrifugal switch of the single-phase asynchronous motor are mainly divided into two types: the open circuit of the centrifugal switch and the short circuit of the centrifugal switch. An open circuit of the centrifugal switch will cause the single-phase motor to fail to start; a short circuit of the centrifugal switch will cause the secondary winding of the single-phase motor to heat and burn.
There are several reasons for the open circuit of the centrifugal switch:
① The spring fails and there is not enough elastic force to close the contact.
②The contact is broken and falling off.
③The contact reed fails due to overheating.
④The moving contacts are dirty, there are debris, grease or rust, and the contact is poor.
⑤The wiring screw is loose or the wire end is off.
⑥The contact insulation board is broken and the contact cannot be closed.
⑦The moving machinery is stuck, and the contacts cannot move.
