Welcome Customer !

Membership

XwbooElectrical & ElectronicsMotorAsynchronous MotorGOST Standard Y2 Three Phase Motor
  • $item.Title
  • $item.Title

GOST Standard Y2 Three Phase Motor

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
Asynchronous Motor
Place of Origin
,
GOST standard Y2 three phase motor is a kind of TEFC squirrel cage motor with the national unified design.

Product Introduction

GOST standard Y2 three phase motor is a kind of TEFC squirrel cage motor with the national unified design. It has the characteristics of high efficiency, energy saving, high starting torque, low noise, low vibration and easy maintenance. The grade of power and mounting measurements are subject to the IEC standard. This series motor is commonly used in the machinery without special requirement specially for reducer, air compressor, water pump, oil pump, packing and food machinery and so on.


Product Detail



Motor Type: GOST standard Y2 three phase motor

Output Power: 0.18 kW - 315 kW

Frame Size: IEC 63 - 355

Number of Poles: 2, 4, 6, 8

Voltage: 220/380V, 380/660V others for request

Frequency: 50 & 60 Hz

Protection Level: IP54 / IP55

Energy Efficiency Rating: IE1 / IE2 / IE3

Insulation Class: B/F

Cooling Method: IC411

Duty: S1


Product Parameter (specification)



GOST standard Y2 three phase motor

image001


Production Features



image002

image006

Know More Us


image006

Why Us



image008


Service and Packing


image009

FAQ



Why is the no-load current of a motor sometimes too large or too small?

1. Because of the excessive pressure during lamination, the insulation lamination of the core silicon steel sheet is broken or the insulation performance of the original insulation layer is not up to the requirements, which causes the insulation resistance between the sheets to decrease, and the core eddy current loss increases. When the current increases, the increase in the no-load loss is greater than the increase in the no-load current.


2. The winding wiring is wrong. eg: The three-phase asynchronous motor should be connected in a star connection, but connected in a delta connection. At this time, the no-load current is more than 3 times the normal value; the number of parallel branches is more than the design value, eg: 1 circuit should be connected in series, In fact, 2 circuits are connected in parallel, or 2 circuits should be connected in parallel, but 4 circuits are connected in parallel. At this time, the current will increase exponentially. Measure the DC resistance to determine whether it is a wiring error and theoretical reasons; remove the terminal cover and visually inspect the wiring end of the winding to find the cause of the fault.


3. A motor with a rated frequency of 60HZ is connected to a 50HZ alternating current, and the applied voltage is still at the rated value of 60HZ. At this time, the no-load current will be more than 1.2 times the normal value. Theoretically, it is 1.2 times, but since the core magnetic density at rated voltage is generally selected at the "knee" of the magnetization curve during the motor design, that is, the part above the linear part that transitions to "saturation", it is actually greater than 1.2 times , The measured data shows that the maximum can reach more than 1.7 times.


Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend