Welcome Customer !

Membership

XZH TEST
Free Member ·1YRS
XiAn,ShanXi
Manufacturer

Main Products: Transformer Testing Machine|Other Testing Machines

Xwboo>Products

XZH TESTFree·1YRS

  • E-mail

    happyxzh@xzhjdkj.com

  • Phone

    86-029-86093121

  • Address

    Building B8-01, Phase I, Ronghao Industrial City, No. 2098, Weiyang 9th Road, Gaoling District, Xi'an City, Shaanxi Province, China

Contact Now

Cable Spiker

Model
Nature of the Manufacturer
Manufacturer
Product Category
Power Cable Testing Equipment
Place of Origin
City, Province
Overview
Recognition method: Judging by the swing direction of the handsJaw: Φ125mmPower: 1.5kVA (intermittent momentary)Weight: 11.00kgDimensions: 430X360X225mmSignal sending frequency: Min: 0.4Hz, Max: 1Hz (range adjustable)
Product Details

The cable spiker is a special equipment, mainly used for further destructive identification of cables after cable identification and before sawing.

In the process of power cable construction, when migrating and repairing the laid cables, it is often necessary to saw off the relevant cables. In order to ensure the operator's personal safety foolproof. First of all, it is necessary to judge whether the relevant cables on site are live or not. Only after confirmation can the relevant cables be sawed off.

The method of absolutely confirming whether the cable is live is currently only the method of short-circuiting the cable relative to the ground or relative to the phase by mechanical puncture.

The cable stabbing device adopts a remote control/automatic piercing device, which can damage and pierce the relevant cables once on site. If the cable is electrified, the cable will explode when punctured, otherwise the cable will not be electrified.

It is composed with two parts: the shooter and the controller:

-10_-4


Working principle

The shooter is a low-speed piston type special device specially designed for stabbing cables. Its structure is reasonable and light, and it is extremely convenient to install and fix. It can be installed at any angle. The controller adopts advanced electronic detection circuit. The device can remotely launch an iron nail to the cable, causing a short circuit of the cable. If the cable is electrified, it must shoot and discharge. If there is no electricity, it is a cable that has been powered off.



Technical Parameters

1. Shooter: 2 shooters

2. Remote control distance: more than 10 meters, you can remote control through the wall

3. Control line length: 5 meters

4. Fixture diameter: φ30-150mm

5. Working power supply: charging AC 220V/50Hz, the built-in battery can work continuously for more than 10 hours

6. Controller: 270×230×120mm 2.5kg

7. The whole set: 470×380×210mm 15.5kg (double gun 506S)


Nail specification

Cable diameter(mm)

30

40

50

60

70

80

90

100

Nail specification

PS27C8

PS37C8

PS47C8

PS52C8


Bullet power specification

Spec.

black

blue

yellow

red

recommend

35kV and below

Above 35kV

Power

Minimum

small

medium

Big

with S1 yellow

with S1 red(6.8*11mm)


Standard equipped: S1 red (power level 5) 50pcs, PS52C8 nails 50pcs



Working description

For the cable spiker, a single shooter can only produce one short circuit point on the cable at a time, and a double shooter can produce two short circuit points on the cable at a time. Since the three-phase cable is usually in the shape of a "品", if a single shooter is pierced, it will just pierce in the gap of the "品" (that is, the gap between the two phases) without penetrating the entire cable. Existence cannot create a real short circuit, that is, it cannot achieve the purpose of stabbing. It is recommended to use a dual shooter configuration. When the included angle of the dual shooters is not 120°, at least one shooter can achieve the purpose of stabbing and form a short circuit point.


_20210928115214



Product Features

●When the angle between the two shooters is not 120°, at least one gun body can achieve the purpose of piercing and form a short circuit point;

●It is controlled by wired + wireless remote control, and it can be remote controlled through the wall;

●AC and DC dual-use, built-in lithium battery pack and large-capacity energy storage device, long charging time;

●Small size and light weight, very suitable for field use.



Operation interface introduction

_20220819165331


1. Output 1/Output 2: used to connect with the gun body, when there is output, the corresponding indicator light is on;

2. Power indication: real-time indication of battery power when the built-in battery is working;

3. Grounding: instrument grounding point, safety protection;

4. Switch: Turn on/off the working power;

5. Charging: DC12V charging port, connect the 12V charger to start charging.



Field wiring

_20220819165434



Packing list

Instrument composition list and diagram

Name

Qty.

Photo

Name

Qty.

Photo

Controller

1

image

remote controller

1

image

Bullet

1

image

nail

1

image

Shooter

2

image

output line

2

image

Ground drill

1

image

ground wire

2

image

screwdriver

sleeve

Tube brush

1

image

power cable

(charger)

1

imageimage

1. Controller: control the shooter to carry out the cable puncture action process;

2. Remote control: The two buttons (A.B) of the remote control correspond to output 1 and output 2 of the controller;

3. Bullet: Loaded into the chamber when stabbing;

4. Shooting nails: put them into the nail tube when stabbing;

5. Shooter

6. Output line: the connection line between the controller and the shooter;

7. Ground wire: the connection wire between the shooter and the ground drill;

8. Ground drill: Generally, there is no formal grounding point on site, so find a reliable ground to insert;

9. Screwdriver, socket, test tube brush: accessories for cleaning the shooter;

10. Power cord (charger): Control box charging cable.



Onsite case


_20220819165901

_20220819165911



Remarks

◆This pointing device has passed the international standard certification CE ISO9001

◆The general delivery time of the equipment is 5-8 days. The specific negotiation at the time of ordering shall prevail.

◆The standard packaging is a wooden box for export to protect the safety of equipment transportation.

◆Usually shipped by international express, such as FEDEX, DHL, , ARAMEX, etc.


_20220806155356__

_20220806155402__


XZH TEST welcomes your inquiry


FAQ

Q:What’s your payment terms?

A: Payment≤USD2000, 99% paid in advance. Amount over USD2000, can be negotiated.

Q: Are you a manufacturer?

A: Yes, We are manufacturer.

Q: Why should you buy the cable spiker from us?

A: Professional R&D and technical support, accept OEM, ODM orders;

Strict quality control and one year of warranty.

Short lead time and fast delivery.

Quick response to your any inquiries.