Underground Metal Pipe DetectorTransmitter frequency: from 256Hz-200KHz(15 kinds)Output power: maximum 10W, adjustable in 10 levelsOutput current: 0~2A Direct connection output voltage: up to 200Vpp Receiving frequency: Detection frequency from 256Hz-200KHzPassive frequency: 50Hz/60HzPositioning accuracy : depth 0-3m (±5%), depth 3-12m (±10%)Maximum detection distance: The cable with good insulation in the direct connection method can reach up to 15KM
Product Details
Description
XHGX507B is a multi-functional underground metal pipe detector. It can be used to detect low-resistance fault points of underground cables to ground, find cable paths, cable burial depth and current measurement. It can also detect underground metal pipes. So it is not just a pipe finding device, with a variety of optional accessories to identify the target pipe or target cable, as well as the location of pipe insulation damage, cable low resistance and broken wire faults to locate.
Working method
The transmitter of the XHGX507B underground metal pipe detector transmits the signal to the pipeline in three ways: direct connection, clamp coupling and induction.
●The direct connection method is to connect the output line of the transmitter directly to the metal pipeline, and inject the signal directly. The direct connection method is suitable for: water pipelines, gas pipelines, communication cables, power cables, cathodic protection pipeline test points or other access points, and continuous metal structures with long-term characteristics.
direct connection
●The clamp coupling method is suitable for the case where the pipeline is exposed, but cannot (or is not allowed) to touch its metal parts, and the pipeline is grounded at both ends (especially suitable for power cables).
Clamp coupling connection
●When the pipeline has no exposed point, the radiation induction method needs to be used; before the ground excavation, the induction method is mainly used when it is necessary to detect whether there is a pipeline underground. The advantage of the induction method is that it is easy to use, does not need wiring, and does not have any form of electrical connection with the pipeline. It is especially suitable for pipeline detection without exposed points, and it is also a main method for regional pipeline detection. The disadvantage is that the induced current of the pipeline is smaller than that of the direct connection method and the caliper method, especially when the pipeline depth is large, the effect is poor, and it is suitable for pipelines with a depth of less than 2m; signals can be induced for all pipelines within a certain range, which will affect the specific pipeline, make the recognition difficult.
0-6m; when the depth is measured, the depth of the pipeline under test is 0-3m (accuracy ±5%), and the depth of the pipeline under test is 3-12m (accuracy ±10%)
★Running cable detection: high-performance transmission caliper, which can couple the output signal to the running cable to the greatest extent.
★Cable/pipeline identification: The flexible clamp can be used easily and clearly gives the identification result;
★Ground fault finding: Use the A-frame (optional accessory) to locate the damaged point of the ground insulation of the pipeline, and the arrow indicates the direction of the fault point.
★Transmitter digital power amplifier power output, automatic impedance matching, automatic protection.
★Built-in large-capacity lithium-ion battery, automatic shutdown under voltage, automatic shutdown (receiver) without operation for a long time.
On-site cable path test
Packing List
Remarks
◆This cable pipe locator has passed the international standard certification CE ISO
◆Lead time is 5-8 days. The specific situation can be negotiated when you place an order.
◆The transport package is a special wooden box with bubble cotton inside. very safe.
◆We usually deliver equipments by FEDEX, DHL, , ARAMEX, etc. It can be negotiated according to different countries.
◆XZH Team is a young team. Our development philosophy is humanized management, intelligent cloud-based products, and internationalized operations. Our development mission is to make electrical equipment free from undetectable failures.
XZH TEST welcomes your inquiry
FAQ
Q: Would you accept OEM order?
A: Yes, we accept, welcome you contact us for more discussion.
Q:What’s your terms of payment?
A:Payment terms can be negotiated, in general, Payment≤USD2000, 99% paid in advance.
Amount over USD2000, can be negotiated.
Q:Why should you buy the underground metal pipe detector from us?
A:Professional R&D and technical support.
Provide overall laboratory solutions to your project.