The XHLJ504 cable pipe locator is composed of a high-power path signal generator(transmitter) and receiver required for detecting buried cable paths.
The basic principle of the cable path meter is to use a path signal generator (ie, the path meter signal transmitting host) to input a path pulse signal into the cable under test, thereby generating electromagnetic waves, and then receiving them with a probe, and the receiver amplifies the received signal. After processing, the output is sent to the earphone and the pointer meter.
This cable route tracer judges the buried path and depth of the cable according to the sound peaks, sound valleys and the deflection degree of the pointer meter in the earphone.
diagram of the working principle of the path meter
Multi-function
The cable path receiver is used in connection with probes and headphones, etc., and can be used as a cable fault pinpointer.
Main components
This cable pipe locator is mainly composed of transmitter and receiver, the two parts are shown as below.
Technical Parameters
Transmitter
Output signal
15kHz intermittent
Output power
100W
Output current
0~2A
Working power
220V (1±10%) 50Hz (1±5%);
Receiver
Magnification
500,000 times
Detection accuracy
±0.2m
Output impedance
350Ω
Working power supply
two standard 9V batteries
Quiescent current
<10mA
Product Features
1. Using the traditional electromagnetic induction principle, strong anti-interference ability.
2. With over-current and short-circuit protection functions, it is safe and reliable.
3. High power output, not limited by cable length, open circuit can also find a path.
4. The output is steplessly adjustable, suitable for various test sites, with strong adaptability.
5. Super strong magnification, the detection depth is greater than 10 meters.
6. Ultra-low power consumption design, the quiescent current is less than 10mA.
7. The design of the analog meter, the signal strength and trend are clear at a glance.
8. The zero level can be adjusted arbitrarily, which is suitable for all kinds of strong and weak scenes.
On-site cable path test --indication diagram
General route detect connecting wire diagram
Super-length or breaking cable route detection wiring diagram
Special route detection wiring diagram
Test buried depth of the cable
When you judge the buried depth of the cable, you can place the probe at an angle of 45 degrees with the ground on the position of the cable that has been measured, "move outward" perpendicular to the path. Find the most minor sound point in the middle of the probe, then the distance the probe moves is the buried depth of the cable. For the above operation essentials, please refer to the schematic diagram of probe placement in the following figure.
Schematic diagram of probe placement
Packing List
Instrument composition list and diagram
Name
Qty.
Picture
Name
Qty.
Picture
Path Signal Generator
1
Receiver
1
Output line (red)
1
Output line (black)
1
Power cable
1
Probe
1
Strap
1
Fuse 3A
2
Headphone
1
Audio line
1
Pinpointing Probe and pin
1
Batteries
2
Onsite testing
Remarks
◆This cable pipe locator has passed the international standard certification CE ISO
◆Lead time is 5-8 days. The specific situation can be negotiated when you place an order.
◆The transport package is a special wooden box with bubble cotton inside. very safe.
◆We usually deliver equipments by FEDEX, DHL, , ARAMEX, etc. It can be negotiated according to different countries.
FAQ
Q: Would you accept OEM order?
A: Yes, we accept, welcome you contact us for more discussion.
Q: What's your terms of payment?
A: Payment terms can be negotiated, in general, Payment≤USD2000, 99% paid in advance.
Amount over USD2000, can be negotiated.
Q: Why should you buy the cable pipe locator from us?
A: Professional R&D and technical support.
Provide overall laboratory solutions to your project.