Welcome Customer !

Membership

XZH TEST
Free Member ·1YRS
XiAn,ShanXi
Manufacturer

Main Products: Transformer Testing Machine|Other Testing Machines

Xwboo>Products

XZH TESTFree·1YRS

  • E-mail

    happyxzh@xzhjdkj.com

  • Phone

    86-029-86093121

  • Address

    Building B8-01, Phase I, Ronghao Industrial City, No. 2098, Weiyang 9th Road, Gaoling District, Xi'an City, Shaanxi Province, China

Contact Now

Underground Cable Pipe Locator

Model
Nature of the Manufacturer
Manufacturer
Product Category
Power Cable Testing Equipment
Place of Origin
City, Province
Overview
Underground cable Pipe LocatorTransmitter frequency: from 815Hz-83KHz(4 kinds)Output power: maximum 10WOutput current: 0~2A Battery model: rechargeable litium batteries Receiving frequency: Detection frequency from 815Hz-83KHzPassive frequency: 50HzPositioning accuracy : Low frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5mMaximum detection distance: The cable with good insulation in the direct connection method can reach up to 15KM
Product Details

Description

 

XHGX507 underground cable pipe locator is mainly used for cable fault location, cable identification, cable path and depth measurement. It can complete tasks that could only be accomplished by a few sets of instruments in the past. The underground cable pipe locator is designed based on the electromagnetic induction method and the application of the communication principle.

1.The electromagnetic signal is generated by the transmitter, and the signal is transmitted to the underground cable under test through different transmission connection methods.

2.After the underground cable induces the electromagnetic signal, an induced current is generated on the cable, and the induced current propagates along the cable to the distance.

3.In the process of current propagation, electromagnetic waves are radiated to the ground through the underground cable. When the receiver detects on the ground, the electromagnetic wave signal will be received on the ground above the cable.

4.The position, direction and fault of the underground cable can be judged by the change of the received signal strength.

 

Features

●The large-screen LCD displays the signal strength, and the bar, arrows and voice prompts make it easy for the operator to judge the underground position of the cable and the fault point. One person can do it all.

●All-digital design, clear large-screen LCD graphic display and reliable positioning

●Portable and lightweight, easy to carry

●Built-in rechargeable battery

●Built-in ohmmeter to measure cable loop resistance

●Can be used to detect insulation faults up to 2MΩ to ground

●With backlight function to adapt to night operation

●Built-in ohmmeter to measure cable loop resistance

●Display cable depth and current

 

Main components

This underground cable pipe locator is mainly composed of transmitter and receiver, with accessories of two clamps, one A-frame and necessary connection wires.

 

 

Technical Parameters

Transmitter

Working frequency

low frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz)

Working mode

direct connection method, coupling method (caliper method), induction method

Matching load

5 ohms—3000 ohms

Impedance display

5 digits

Overheating and over current

automatic protection

Power output

low gear, middle gear, high gear

 

Receiver

Working frequency

low frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz),  Passive frequency 50Hz

Antenna mode

valley method (zero value mode), crest method (peak mode), step voltage method and clamp current method (A-frame)

Current indication

display the effective current value of the cable under test (unit: mA)

Working temperature

-10℃+55℃

Power indicator

graphic display

Battery life

continuous work> 8 hours: intermittent work> 16 hours

Signal strength indication

ladder diagram, digital range 0-999

Gain control

manual adjustment, dynamic range of 100dB

Detection depth

the maximum detection depth is not less than 5 meters

Maximum detection distance

The cable with good insulation can be up to 15km in the direct connection method

Depth measurement

press the depth key to display three digits, the maximum depth can be measured up to 10 meters

Accuracy

Low frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5m

 

More photos

 

We provide OEM service, your logo can be printed on the panel of transmitter.

Package- Aluminum alloy protective box.

 

Application case

 

WELCOME YOU CONTACT US FOR MORE INFORMATION

https://www.youtube.com/channel/UCRq16y0_9W-u9oDGwSy3L9A/videos

 

Remarks

◆This cable pipe locator has passed the international standard certification ISO9001

◆Lead time is 7-10 work days. The specific situation can be negotiated when you place an order.

◆The transport package is a special wooden box with bubble cotton inside. very safe.

◆We usually deliver equipments by FEDEX, DHL, , ARAMEX, etc. It can be negotiated according to different countries.

 

 

 

 

 

◆XZH Team is a young team. Our development philosophy is humanized management, intelligent cloud-based products, and internationalized operations. Our development mission is to make electrical equipment free from undetectable failures.

 

XZH TEST welcomes your inquiry

 

FAQ

 

Q: Would you accept OEM order?

A: Yes, we accept, welcome you contact us for more discussion.

Q:  What’s your terms of payment?

A:  Payment terms can be negotiated, in general, Payment≤USD2000, 99% paid in advance.

 Amount over USD2000, can be negotiated.

Q:  Why should you buy the cable pipe locator from us?

A:   Professional R&D and technical support.

Provide overall laboratory solutions to your project.

Strict quality control and one year of warranty.

Short lead time and fast delivery.