Display: 12.1-inch touch color LCD screenSampling frequency: 400MHzLow voltage pulse width: 0.1uS/2uSMinimum resolution: 0.5m (100m/us)Test blind zone: ≤20mRanging range: ≤60kmMeasurement error: ≤±(0.5%×L+1m), L is the cable lengthPower supply mode: built-in rechargeable lithium batteryWorking conditions: Ambient temperature: -25~65℃Relative humidity: ≤90%
Product Details
Detailed operation videos help you get started easily
XHGG501A TDR cable fault locator is a device independently developed and produced by our company. It has low-voltage pulse method and high-voltage flashover method operation mode, which is used for rough measurement of cable fault distance. The equipment complies with international standards and has passed the international quality certification system. For beginners, we have a very detailed video operation tutorial, which is convenient for users to learn to operate as soon as possible.
Know more about power cables
Power cables can be divided into:
●Low-voltage cables (cables with voltage levels of 6kV and below).
●Medium-voltage cables (cables with voltage levels of 6kV and above, 35kV and below).
●High-voltage cables (cables with voltage levels of 66kV and above).
And cable faults can be divided into open circuit faults, low resistance faults, leakage high resistance faults, and flashover high resistance faults according to their nature.
How to judge cable faults
In general, there are three ways to judge the nature of cable faults:
●Judge by insulation resistance meter, multi-meter.
●Judge by cable pre-test results.
●Judge by "cable fault tester". Low-resistance and open-circuit faults (high-resistance) can be directly judged by the "low-voltage pulse method" test waveform of a multi-meter or a "cable fault tester".
Suitable for testing the faults of various cables
XHGG501A TDR cable fault locator is a special instrument for measuring and analyzing power cable status and fault distance. It is suitable for testing low resistance, short circuit, open circuit breakage faults, leaking high resistance and flashover high resistance faults of power cables, coaxial cables, street light cables, buried wires, etc. .
It adopts the combination of modern electronic technology and computer technology to realize signal filtering, acquisition, data processing, waveform display, waveform analysis, and report generation to complete the cable wave transmission speed measurement, cable length test, and cable fault distance test.
●Adopt environmentally friendly protective case, no less than PI54.
Packing List
Instrument composition list and diagram
Name
Qty.
Picture
Name
Qty.
Picture
TDR cable fault locator
1
Double Q line
1
Stylus
1
Sampler
1
Single Q line
1
Power cable
1
Fuse
some
Ground wire
(optional)
1
Onsite cable fault locating
Remarks
◆This TDR has passed the international standard certification CE ISO
◆Lead time is 5-8 days. The specific situation can be negotiated when you place an order.
◆The transport package is a special wooden box with bubble cotton inside. very safe.
◆We usually deliver equipments by FEDEX, DHL, , ARAMEX, etc. It can be negotiated according to different countries.
◆XZH Team is a young team. Our development philosophy is humanized management, intelligent cloud-based products, and internationalized operations. Our development mission is to make electrical equipment free from undetectable failures.
XZH TEST welcomes your inquiry.
FAQ
Q: Would you accept OEM and ODM order?
A: Yes, we accept, welcome you contact us for more discussion.
Q:What’s your terms of payment?
A:Payment terms can be negotiated, in general, Payment≤USD2000, 99% paid in advance.
Amount over USD2000, can be negotiated.
Q:Why should you buy the TDR cable fault locator from us?
A:Professional R&D and technical support.
Provide overall laboratory solutions to your project.