Welcome Customer !

Membership

Jiuyin Science and Technology Chengdu Co., Ltd.
Free Member ·1YRS
ChengDou,SiChuan
Manufacturer

Main Products: Oxygen Nitrogen Analyzer (Oxygen Nitrogen Hydrogen Analyzer)|Automobile Exhaust Gas Analyzer

Xwboo>Products

Jiuyin Science and Technology Chengdu Co., Ltd.Free·1YRS

  • E-mail

    sales@meas-elec.com,service@meas-elec.com

  • Phone

    028-85044052/028-85044053

  • Address

    4th floor, unit 1, building 4, District D, West Zhigu, 66, Wuxing 4th Road, Wuhou District, Chengdu City, Sichuan Province

Contact Now

HT-TZ302 Multicomponent Gas Transmitter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
HT-TZ302 Multicomponent Gas Transmitter
Product Details

    Measurement Principle: O2: Ion current (limiting current)

    CO: Fuel cell

    Display Mode: External display module available, 4 digit 16-segment alphanumeric LED display (optional)

    Measurement Range: O2: Type E 10.00%~98.00%

    Type F:10.00%~99.99%

    CO:0~40PPm (range expandable)

    Measurement Accuracy: O2: ≤±1%FS

    CO: ≤±5%FS

    Resolution: O2: 0.01%

    CO: 0.1PPm

    Repeatability: ≤±1.0%FS

    Response Time: T90≤40S (comprehensive response by two sensors)

    Output Port: 2 ways of 4-20mA.DC (Non-isolated output, load resistance<1KΩ), corresponding to two kinds of measurement media;

    2 ways of programmable alarm output (Dry contact type, maximum load 220VAC/2A), corresponding to two kinds of measurement media;

    Display module port

    Communication Mode: RS485

    Power Supply: DC24V±10%, 0.5A

    Environment Temperature: -10℃~+50℃

    Storage Environment Humidity: <90%RH, non-condensing

    Operation Environment Humidity: <99%RH, non-condensing

    Sample Gas Temperature: 0℃~40℃

    Sampling Mode: Gas in

    Gas Inlet Pressure: Stable pressure (control the pressure within the recommended limits to make sure the flow is within 400~600mL/min)

    Gas Outlet Pressure: Free venting (under safe conditions)

    Size: 147mm×182mm×62mm (H×W×D)

    Installation Hole Size: 133mm×100mm (H×W)

    Sensor Service Life: Ion current >5 years, fuel cell >2 years (under normal conditions of use)

    Gas Circuit Port: NPT 1/8 internal thread

    Gas Circuit Connection: Φ6 stainless-steel cutting ferrule / fitting (one out of two)

    Instrument Weight: Net weight 1.0Kg

    Installation Method: Wall mounting

    a. The original imported limiting current sensor used to measure oxygen consumes no service life when power is off, and it has a high measurement accuracy, rapid response speed and is easy to maintain, etc.;

    b. The original imported fuel cell sensor used to measure CO has a high measurement accuracy, rapid response speed, long calibration cycle and strong anti-interference capability, etc.;

    c. The cavity is made of 326L and is strongly corrosive-resistant;

    d. External display module can be attached to make the operation intuitive and convenient (optional);

    e. User could set upper and lower limits of oxygen or CO concentration of 2 ways of corresponding 4-20mA analog outputs;

    f. Automatic temperature and pressure compensation could eliminate the impact of environment temperature and pressure changes on the measured value;

    g. Wall-mounting installation is easy and convenient to install and maintain;

    h. RS232 (default) or RS485 digital communication port can be selected according to clients’ requirement, to realize unidirectional or bidirectional communication with computer or other digital communication facilities.

    It is widely used in the real-time detection and analysis of high concentration oxygen and trace CO in large air separation for high purity oxygen, medical and industrial oxygenerator, smelting industry, medical and health care, petrochemical industry, environmental protection, electronic power and other industries.

    Measurement range

    Display mode (optional)