Measurement Principle: Fuel cell
Display Mode: 128×64 dot matrix LCD
Measurement Range: 0~10/100/1000PPm, 0~25%/99% O2
(Range is selectable: trace or normal)
Measurement Accuracy: 0~1000PPm/1%/25%/99% ≤±1%FS
0~100PPm≤±2%FS
0~10PPm≤±5%FS
Repeatability: ≤±1.0%FS
Response Time: T90≤30S
Output Port: 4-20mA.DC (Non-isolated output, load resistance<1KΩ)
2 ways of programmable alarm output (Dry contact type, maximum load 220VAC/2A)
Power Supply: DC24V±10%, 200mA
Environment Temperature: -10℃~+50℃
Storage Environment Humidity: <90%RH, non-condensing
Operation Environment Humidity: <99%RH, non-condensing
Environment Temperature: 0℃~40℃
Sampling Mode: Gas in
Gas Inlet Pressure: Relative pressure ±5kPa, stable pressure (control the pressure within the recommended limits to make sure the flow is within 400~600mL/min)
Gas Outlet Pressure: Free venting (under safe conditions)
Sampling Pipe: Φ6mm316L seamless stainless-steel pipe and PTFE pipe
Pretreatment Level: Level I
Explosion-Proof Level: Exd IIB T6 Gb
Certificate Number: CNEx21.1590X
Size: 248mm×324mm×157mm (H×W×D)
Installation Hole Size: 145mm×80mm (H×W)
Sensor Service Life: >24 months (under normal conditions of use)
Installation Method: Wall mounting
Note: Oxygen transmitter of different ranges can be equipped according to the conditions, which are trace oxygen system and normal oxygen system;
Corresponding sampling system can be designed according to the conditions, which are positive pressure, micro-positive pressure and micro-negative pressure sampling system.