Welcome Customer !

Membership

Jiuyin Science and Technology Chengdu Co., Ltd.
Free Member ·1YRS
ChengDou,SiChuan
Manufacturer

Main Products: Oxygen Nitrogen Analyzer (Oxygen Nitrogen Hydrogen Analyzer)|Automobile Exhaust Gas Analyzer

Xwboo>Products

Jiuyin Science and Technology Chengdu Co., Ltd.Free·1YRS

  • E-mail

    sales@meas-elec.com,service@meas-elec.com

  • Phone

    028-85044052/028-85044053

  • Address

    4th floor, unit 1, building 4, District D, West Zhigu, 66, Wuxing 4th Road, Wuhou District, Chengdu City, Sichuan Province

Contact Now

HT-LA620 Flue Oxygen Analyzer

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
HT-LA620 Flue Oxygen Analyzer
Product Details

    Measurement Principle: Zirconia

    Display Mode: 128×64 matrix dot OLED

    Measurement Range: 0.01%~25.00% O2

    Measurement Accuracy: <±1.0%FS

    Resolution: 0.01%

    Repeatability: <±0.5%FS

    Stability: <±1.0%FS

    Response Time: T90≤5S

    Output Port: 4-20mA.DC (default) or 0-10V.DC (Non-isolated output, 4-20mA load resistance<1KΩ, 0-10V load resistance >10KΩ)

    2 ways of programmable alarm output (Dry contact type, maximum load 220V/2A)

    Communication Port: RS232 (default) or RS485

    Power Supply: AC220V±10% 50/60Hz, power dissipation <5VA

    Instrument Operation Temperature: -10℃~+50℃

    Probe Operation Temperature: Normal type 0~200℃, high-temperature type 0~400℃, special type 0~650℃

    Calibration Method: Online calibration

    Holt-Cutting Size: Φ70mm~Φ90mm

    Connecting Cable: 5 meters (standard)

    Probe Length: Standard length 1110mm, other length is customizable (≤1.5m)

    Sensor Service Life: >5 years (under normal conditions of use)

    Installation Method: Instrument: Wall mounting

    Probe: Plug-in (standard DN65 flanged mounting)



    a. OLED active illumination display makes the operation easy and convenient;

    b. The new type zirconia sensor has a high measurement accuracy, rapid response speed and small drift value, etc.;

    c. Sensor’s pipe wall which would contact flue gas can be coated to reduce the corrosion by corrosive gas to extend its service life;

    d. The contact part of oxygen probe and flue gas adopts new high-temperature alloy steel. The oxygen probe can be directly inserted into the furnace below 650℃;

    e. PID automatic temperature control circuit could raise the temperature rapidly and accurately, eliminating the impact of outer environment changes on the temperature control;

    f. Error detection function could enhance the efficiency of debugging and its self-protection ability;

    g. Multiple error information alert function;

    h. 5000 pieces of historical data can be stored automatically, enabling user to read historical data freely;

    i. The instrument allows multi-point fractional liner calibration, meeting the need for an accurate measurement of oxygen content among the full range.

    j. The protection level of the probe and instrument is IP65 (except for the front area of the probe);

    k. User could freely set the upper and lower limits of 4-20mA(default) or 0-10V output to acquire an analog output result with higher accuracy;

    l. RS232(default) or RS485 communication port allows a unidirectional or bidirectional communication with computer or other digital communication equipment according to user’s requirement.


    It is widely used in metallurgy, chemical industry, electric power, heating, environmental protection and other industries, and the analysis of oxygen concentration in flue gas in various industrial boilers and kilns; control of contaminants in medical waste incinerators; pollution emissions control supported by CEMS; application of VOD in steelmaking furnace.



    Probe length and its operation temperature

    Connecting cable length

    Background gas composition

    RS232 or RS485 as communication port

    4-20mA or 0-10V as analog output